• Surgical  Mask Tester Surface Moisture Permeability Tester Height Adjustable Manual Control
Good price Surgical  Mask Tester Surface Moisture Permeability Tester Height Adjustable Manual Control online

Surgical Mask Tester Surface Moisture Permeability Tester Height Adjustable Manual Control

Product Details:

Place of Origin: China
Brand Name: KingPo
Certification: Calibration Certificate
Model Number: KP-MT230

Payment & Shipping Terms:

Minimum Order Quantity: 1
Price: To be quoted
Packaging Details: safety carton pack or plywood box
Delivery Time: 30 working days
Payment Terms: T/T
Supply Ability: 3 sets per month
Contact Now

Detail Information

Test Pressure: 0-20KPa Test Height:: 150±2mm
Funnel Height:: 195±10mm Funnel Diameter:: 150±5mm
Control Method: Manual
High Light:

tv signal tester

,

mask test machine

Product Description

Moisture permeability tester

Test standard:

Surgical mask

Synthetic blood penetration test for surgical masks synthetic blood penetration test for surgical masks can output test reports and store test data. GB 19083-2003-2011 GB/T 4745 requirements.

 

Characteristics of the equipment

 

1. Configure funnel for detection.

 

2. The height can be adjusted within a certain range.

 

Technical parameters of detector

 

1. Test height: 150±2mm.

 

2. Funnel height: 195±10mm.

 

3. Funnel diameter: 150±5mm

 

 

Technical parameters

 

Product name Surface moisture tester
Fundamental add water through the funnel and then carry out leakage detection of the measured part
  Diameter of the funne 150±5mm
Height of the funnel 195±10mm
Test height 150±2mm
Test medium Water
Control method Manual
Scope of application Surgical mask

 

 

Protective clothing synthetic blood penetration tester

Test standard:

Synthetic blood penetration tester for protective clothing synthetic blood penetration tester for surgical masks can output test reports and store test data. Meet the test standard GB 19082-2010 surgical mask.

Characteristics of the equipment

 

1. The equipment is equipped with air pump to adjust the air pressure.

2. The detector is equipped with positive pressure sensor to collect the pressure of test data.

3. The pressure has a non-polar adjustable function, and the technical parameters such as the pressure holding time can be set.

 

Technical parameters of detector

 

1. 50-55ml blood test.

2. Control mode: manual control.

3. Pressure 20kpa, accuracy 0.1kpa.

 

Technical parameters

Product name Synthetic blood penetration tester
Fundamental To simulate breathing through the vacuum pump, and to detect the pressure difference
  Test pressure 0-20KPa
Micromanometer range 0-0.1KPa
Pressure value resolution 0.1kPa
Time precision 0.1s
Test medium Synthetic blood
Control mode manual
Amount of blood 50-55ml
Scope of application Protective clothing

 

Configuration list

Name Unit Quantity Remarks
Pressure sensor unit 1 佛山一众
Case pcs 1 Spraying case
Posstive pressure pumbs pcs 1 Provide compressed air
Neddle valve pcs 2 Adjust the flow
Electric appliance set 1 Chin
Air pumb unit 1 Chint Group
Pressure relief valve unit 1 Manual pressure relief
Tank stores pcs 1 Store compressed air

 

 

The flame retardant tester for surgical masks is mainly used to test the burning performance of surgical masks after they touch the flame at a certain linear speed.

Surgical  Mask Tester Surface Moisture Permeability Tester Height Adjustable Manual Control 0

Characteristics of flame retardant detector for surgical masks

1. The mask fixture is a metal head mold, which can fully simulate the actual use of the mask.

2. The burner is equipped with propane (liquefied gas) and other combustible gas interfaces.

3. The burner height is adjustable.

4. Automatic timing and positioning of burner.

5. Combustion time and flame retardant time are recorded automatically and displayed numerically.

6. Equipped with flame temperature measuring probe and flame temperature display.

 

Technical specifications of flame retardant detector for surgical masks

1. The linear velocity of the nose * is (60±5) mm/s

2. Flame height can be adjusted (set at 40±4mm before delivery)

3. The diameter of the flame temperature measuring probe is 1.5mm

4. The temperature of the flame at the height (20±2) mm from the top of the burner is (800±50) ℃

5. The distance between the top of the burner and the lowest point of the mask is (20±2) mm

6. The height adjustment range of burner is 30mm

7, metal head die wall thickness 2 ~ 3mm, flame resistant combustion resistant

8. Timer for continuation time and smoldering time: 0 ~ 99.99 seconds, accuracy: ±0.01 seconds

9. Power supply: AC220V, 50Hz, 50W

10. Weight: about 30kg

 

Applicable standards

Technical requirements for surgical protective masks

YY 0469-2011 surgical masks

Respirators, self-priming filter respirator, 6.15 flammability

Want to Know more details about this product
I am interested in Surgical Mask Tester Surface Moisture Permeability Tester Height Adjustable Manual Control could you send me more details such as type, size, quantity, material, etc.
Thanks!
Waiting for your reply.