Payment & Shipping Terms:
|Power:||Electronic,AC 220V,AC 220V/50HZ||Usage:||Flame Testing Equipment,Universal Testing Machine,Textile Testing Instrument,Flammability Tester|
|Warranty:||1-2 Years||Product Name:||UL94 Horizontal Vertical Flame Test Equipment,Sand And Dust Test Chamber|
FAA-CCAR-25 Flame Tester,
Appendix F Flame Tester,
AC 220V Flame Test Equipment
The instrument is in accordance with part B (4), B (6) and B (7) of Appendix F of ccar-25.
The instrument is controlled by PLC and touch screen, which makes the test more automatic and the data easier to extract, and provides independent test procedures for vertical combustion and 45 ° and 60 ° respectively.
Igniter timing: 0 ~ 99.99 seconds, any setting
Afterburning time and flame retardant time timer: 0 ~ 99.99 seconds,: ± 0.01 seconds
Flame height measuring device: ruler height 38.1 mm
Gas used: methane, propane or butane or liquefied petroleum gas or other combustible gas
Working power supply: AC220 V, 50 Hz, 50 W
Weight: About 70kg
The box is painted with transparent observation window
Dimension of combustion chamber: length 800mm x width 450mm x height 640mm
Electronic automatic ignition
The ignition time can be set arbitrarily from 0 to 99.99 seconds, the afterburning time and flame retardant time can be recorded automatically and displayed digitally
Adjustable flame height
"Push pull" specimen holder fixture
The burner is fixed on the sliding track for convenient operation. When it is pushed to the burning position, it will automatically time.
The inlet needle valve controls the gas flow and adjusts the standard flame height to 38.1 mm
According to different test samples, a variety of sample holders are available; BWF sample size sample holder is customized.
Imported brand pressure gauge and pressure regulating valve to regulate gas pressure
Two sets of mounting sample holder; vertical combustion sample holder: sample exposure size 50.8mm x 305mm; 45 ° combustion sample holder: sample exposure size 203mm x 203mm
The inner diameter of the imported Bunsen lamp is 9.5mm; the lower end of the test must be 19.1mm higher than the top of the lamp
The thermocouple is configured to verify the flame temperature of 1000 ℃, and the flame temperature measured in the flame center shall not be lower than 843 ℃
The ignition time can be set freely and will be reminded automatically
PLC with touch screen microcomputer control system; more automatic experimental process; automatic data recording and storage
The system provides 6 ~ 8 sample data storage; the test system can query
The system provides two sets of test procedures of vertical combustion and 45 ° combustion
Contact Person: email@example.com