Home
Products
About Us
Factory Tour
Quality Control
Contact Us
Request A Quote
Home News

IEC 62368 Test Equipment

Certification
China KingPo Technology Development Limited certification
China KingPo Technology Development Limited certification
Customer Reviews
Dear Supplier KINGPO TECHNOLOGY DEVELOPEMENT, In the ambit of ISO 9001:2015 certification, we intend to communicate the requirements as well as its percentage used on final evaluation used by ISQ to control and monitor its external supplier’s performance as per bellow: According with the above requirements to be maintained in future evaluations

—— ISQ Procurement Management

Good day and thank you for you According to the sample of the instrument you provided, we are very satisfied with our test. We want to change the order from 2 to 10. The following is the order details of our Asia Pacific branch. Would you please send me the quotation of the corresponding office? So we can generate an order to confirm it. Thank you.

—— Angel

I'm Online Chat Now
Company News
IEC 62368 Test Equipment
Latest company news about IEC 62368 Test Equipment

IEC 62368-1:2018-10

TESTING AND MEASURING EQUIPMENT/ALLOWED SUBCONTRACTING

IEC 62368-1 test equipment has been identified for use in the sub-grouped below:

 

R = Required to be at Lab

 

RA = Required for Amplifiers; in addition to RB, required for apparatus with audio amplifiers (audio power > 0,5 Watts)

RB = Required Basic - test and measurement equipment required for all apparatus RC = Required for Cable distribution system; in addition to RB, required for apparatus with connection(s) to a cable distribution system

ROUT = Required for equipment intended for installation Outdoors RSH = Required for SHredder; in addition to RB, required for shredder

RT = Required for Telecom; in addition to RB, required for apparatus with connection(s) to a telecommunication network

RV = Required for CRT / Plasma/LCD or other Video equipment in addition to RB required for testing CRT Cathode ray Tubes/ picture tubes, plasma/LCD or other video apparatus

RWPT = Required for equipment that functions as a Wireless Power Transmitter

 

S = May be Subcontracted

SP = SPecialized testing facility

W = May be Witnessed at MTL

 

 

Clause Measurement/testing Testing / measuring equipment / material needed Subcontracting
4.1.4 Equipment Installation (Outdoor), Conditioning Test chamber: minimum range of –33°C to +40°C. ROUT
4.7 Equipment for direct insertion in to mains socket-outlets Test equipment (see Fig. 11 of IEC 60065) RB
4.8 Coin/button cell batteries 30 N ± 1N applied by rigid test finger (Figure V.1); test hook (Figure 20); calliper; timer RB
Crush Test (330 N ± 5N); flat surface measuring 100 mm by 250 mm; timer; air RB
Torque gauges, test hook RB
5.2.2.2 Steady- state voltage and current limits

Ampere- and voltmeter suitable for the current and waveform, frequency meter

Measuring instruments in according to IEC 60990: 1999 Figure 4 and 5, timer, 2 kW resistor

RB
5.2.2.4 Single pulse limits Oscilloscope RB
5.3.2.

Accessibility to electrical energy sources and

safeguards

Test probes V1, V2, V3, V4, V5; T.3, calliper, hipot RB
    Voltage supply Single phase voltage supply systems/variability/adequacy RB

 

 

Clause Measurement/testing Testing / measuring equipment / material needed Subcontracting

5.4.1.4, 9.2.5,

Annex E

Maximum operating temperatures for materials, components and systems   Three phase voltage supply systems S
Temperature (rise) Temperature recorder (multi-channel) RB
Thermocouples RB
Winding resistance (normally > 1,0 W 2-wire, 4-wire <1,0 W ). RB
Voltage Voltmeters (ac/dc) RB
High voltage meter (probe) RB
Current Currents (ac/dc) RB
Loading Loads (resistive) RB
5.4.1.5.3 Thermal cycling test procedure

Annex G 13.6.2

Full draught oven (± 2ºC) Cooling facility (0º±2 C)

Scratch test device with steel pin

S
5.4.1.10

Thermoplastic parts on

which conductive metallic parts are directly mounted

Vicat test B 50 of ISO 306 S
Ball pressure test apparatus according to IEC 60695-10-2, Oven at least 125ºC ± 3°C RB

5.4.2, 5.4.3,

5.4.4,

Annex X

Clearances, creepage distance, solid insulation Oscilloscope RB
Dial gauge or calliper RB
Micrometer RB
Pins etc. with different diameters RB
Microscope RB
Impulse test generator circuit 1 of Table D.1. Impulse test generator circuit 2 of Table D.1. impulse test generator circuit 3 of Table D.1 RT S RC
Test equipment for tracking index per IEC 60112 S

Mandrel (figure 25 to 28), metal foil, equipment suitable for electrical strength test loads

Stop watch, weight

S
5.4.5.2 Antenna terminal insulation Insulation resistance meter (500V > 4 MΩ), antenna interface test generator circuit 3 of Table D.1; timer, dial gauge or calliper RC
5.4.8 Humidity conditioning Chamber RH (93 ± 3)%, (20...30)° C RB
Chamber RH (93 ± 3)%, (40 ± 2)°C RB
Extra large environmental testing chamber SP

 

 

Clause Measurement/testing Testing / measuring equipment / material needed Subcontracting
    Test Instrument/equipment according to Figure 29 for electric strength (of solid/thin sheet insulation). S
5.4.10

Safeguards against

transient voltages from external circuits

Blunt probe figure V.3; Insulation resistance meter (500V > 2 MΩ), electrical strength tests of solid/thin sheet insulation. RB
5.4.11

Separation between

external circuits and earth

Non-inductive resistor 5000Ω, Ampere meter RB
5.4.12 Insulating liquid Test equipment with relevant voltage and trip current RB
5.5.2.2 Capacitor discharge Measuring instrument with input impedance 100M Ω or more in parallel with an input capacitance of 25pF or less; timer RB
Capacitor discharge See G.16 electric strength tests  
Resistor See G.10  
5.5.8

Insulation between the mains and an external circuit consisting of a

coaxial cable

See voltage surge test of G.10.4; the impulse test of G.10.5  
5.6.3

Requirements for protective earthing

conductors

Calliper, micrometer RB
5.6.4.1

Resistance of protective

conductors and their terminations

High current source with a voltage not exceeding 12 V, RB

Determination of the overcurrent protective device and circuit (Annex

R)

Source with at least 1500A short circuit S
5.7

Prospective touch voltage touch current and protective conductor

current

Networks in according IEC 60990:1999 figures 4 and 5; ampere meter RB
5.8

Back feed safeguard in

battery backed up supplies

Measuring instrument with input impedance 100MW or more in parallel with an input capacitance of 25pF or less; oscilloscope; timer; calliper RB
6.2.2 Power source circuit classification Watt meter, variable resistor load, stop watch RB

 

 

Clause Measurement/testing Testing / measuring equipment / material needed Subcontracting

6.4.8.3.3,

Annex S.2

Top openings and top openings properties Cheesecloth bleached cotton cloth 40g/m2; timer RB
8.2

Mechanical energy source

classifications

Scale up to 25kg RB
8.5.4.3

Equipment having an electromechanical device

for destruction of media

Test probe (jointed) of Annex V (figure V.1 and V.2) and wedge probe V.4

Force 45N and 90 N with wedge probe

RB RSH

RB

8.5.5.2. High pressure lamps Dark sticky mat, magnified glass with a resolution of 0,1 mm RB
8.6.2 Static stability for floor standing equipment Inclined plane 10° Force 100N RB

Force 250N/

Test tool 800Nwith a flat surface 12,5cm by 20cm Ruler

RB
8.6.4 Glass slide test Glass plate, 10° RB
8.6.5 Horizontal force test Inclined plane 15° RB
8.7 Equipment mounted to a wall or ceiling Several weights, timer Torque gauges RB
8.8 Handle strength test method 75mm width, several weights, scale, timer RB
8.9 Wheels or casters attachment requirement Force 20N, stop watch RB
8.10 Carts, stands and similar carriers Force up to 440 N with a circular plan surface Æ 30mm, stop watch, RB
8.11 Mounting means for rack mounted equipment Several weights, timer RB
8.12 Telescoping or rod antennas (Annex T.11) test tool for applying torque up to 0,6Nm, test tool for applying force 20N, stop watch RA
9.6.3 Wireless power transmitters Figure 47 – Steel disc Figure 48 – Aluminium ring Figure 49 – Aluminium foil RWPT
10 Radiation Laser (including laser diodes) Several special equipment for laser classification (IEC 60825-1, IEC 60825-2, IEC 60825-12) S

 

 

Clause Measurement/testing Testing / measuring equipment / material needed Subcontracting
    Light emitting diodes (LEDs) Several special equipment for LED classification (IEC 62471:2006) S
Image Projector

Several special equipment for image projectors (IEC

62471-5)

S
X-ray

. Radiation monitor, ionizing

chamber type with an effective area of 1 000 mm²

S

Effect of UV radiation on

materials (Annex C)

Test equipment according to ISO 178, 179, 180, 527 and

8256 and according ISO 4892 series

S

Human exposure to UV radiation

(Annex C)

Measuring equipment according to IEC 62471 S
Acoustics

Special equipment for acoustic measurements (EN50332-

1, -2 & -3)

S
Annex B.2.5 Input test Ampere meter suitable for the current and waveform, power meter, voltmeter, RB
Variable loads RB
Signal generator in acc. IEC 60107-1:1997 RV
Annex B.3.2 Covering of ventilation openings piece of card with minimum 200 g/m² density RB
Annex C UV radiation

Carbon-arc light-exposure test - apparatus described in ISO 4892-4, or equivalent, in accordance with the

procedures given in ISO 4892-1 and ISO 4892-4 using a type 1 filter, with water spray.

 

Xenon-arc light-exposure test - apparatus described in ISO 4892-2:2013, or equivalent, in accordance with the procedures given in ISO 4892-1 and ISO 4892-4 using cycle 1 of method A of Table 3, without water spray.

 

Tensile strength, ISO 527 Flexural strength, ISO 178 Charpy impact, ISO 179 Izod impact, ISO 180

Tensile impact, ISO 8256

S
Annex E Test conditions for equipment contain audit amplifiers Testing box RA

Signal generator (sinus) 1kHz or alternative

Band-pass filter for wide-band noise measurement, pink noise signal generator

RA

 

 

Clause Measurement/testing Testing / measuring equipment / material needed Subcontracting
Annex F.3.10.2 Durability water/piece of cloth/ timer RB

Annex

F.3.10.3

Durability Petroleum spirit (85% n-hexane), (CAS# 110-54-3) RB

Annex G.5.4.5.3

G.5.4.6.3

G.9.3 S.3.1

S.3.2

Alternative test method Cheesecloth (bleached cotton cloth 40g/m2), Wrapping Tissue (12g/ m2 – 30g/m2) RB
Annex G.5.3.4 Test for FIW

Test equipment according to IEC 60851-5:2008, IEC 60317-0-7 and IEC 60317-56

Test equipment with relevant voltage and trip current Full draught oven (± 2ºC)

Cooling facility (0º±2 C)

Partial discharge test equipment

S
Annex G.7 Mains supply cords Test equipment according IEC 60227 S
Appropriate weights RB
Torque meter or equivalent RB
Annex G.9 IC current limiters

Variable loads

Capacitor 470 mF; resistor 0 W

Chamber (-30 to 70 ± 2)°C

S
Annex G.10

Test for resistor serving as safeguard

Test sequence

Impulse test generator circuit 1 of Table D.1. Impulse test generator circuit 2 of Table D.1. impulse test generator circuit 3 of Table D.1

Test according to IEC 60068-2-78

S
Annex G.13.6.2 Test method and compliance criteria Full draught oven (± 2ºC) S
Annex G.13.6.2 Abrasion resistance test Scratch test device with steel pin S
Annex G.15 Hydrostatic pressure Hydrostatic pressure test device S

Tubing and fittings

compatibility test

Tensile strength test device in acc to ISO 527 series S
Vibration test Vibration generator (0,35mm/10Hz-55Hz-10Hz) IEC 60068-2-6 S
Annex G.16 Discharge function Chamber RH (93 ± 3)%, 20...30ºC, (40 ± 2)ºC S
    Impulse test generator (capable of delivering an impulse as specified in Circuit 2 of Table D.1 that can be superimposed at 90° and 270°on the Mains) S

 

 

Clause Measurement/testing Testing / measuring equipment / material needed Subcontracting
Annex H Criteria for telephone ringing signals 5 000Ω resistor RT
Annex J

Insulated winding wires for

use without interleaved insulation

Test equipment according to IEC 60851-3 and IEC 60851-5 S

Annex M.4.2,

M.4.4.4

Charging voltage and

current

Oven S
Annex M.7

Concentration of hydrogen

gas

Hydrogen gas analyzer S
Annex M.8.2

Protection against internal ignition from external spark sources – Spark

Test

Equipment according to IEC 60896-21:2005 Sub cl. 6.4 S
Annex P.2 Safeguards against entry of solid foreign objects Suitable tool (or tools) to simulate a straight metal object, 1mm in diameter, length up to 13 mm RB
Annex. P.4

Metallized coatings and

adhesives securing parts

Oven S
Annex R Limited Short-circuit test Current generator, 1500 A S
Annex S Tests for resistance to heat and fire Needle flame test apparatus acc. to IEC 60695-11-5:2004 SP
Distillate fuel oil as described in annex S.3.2 S
500W flame test apparatus in acc. to IEC 60695-11-20:1999 SP
Cheesecloth (bleached cotton cloth 40g/m2), wrapping tissue (12g/ m2 – 30g/m2) RB

Annex

T.2 - T.4

Steady force test

10N ± 1N

Test finger (figure V1 or V2 unjointed, 30N± 3N)

Test tool 100N± 10N with a circular plan surface Æ 30mm Stop watch

RB
Annex T.5 Steady force test, 250 N Test tool 250N± 10N with a circular plan surface Æ 30mm. RB
Annex T.6 Enclosure impact test Æ 50mm/500g± 25g steel ball, ruler RB
Annex T.7 Drop test Hard wood 13mm on 18mm ± 2mm plywood, two layers. ruler up to 1000 mm ± 10mm RB
AnnexT.8 Stress relief test Measuring equipment according to IEC 60695-10-3 or Oven 70K over normal temp. RB
Annex T.9 Impact Test steel ball 50mm, approx 500g., Fragmentation test Centre punch and a square of 50 mm side RB
Annex T 10 Fragmentation test

Centre punch (having a head with a mass of 75 g ± 5 g and a conical tungsten carbide tip

with an angle of 60° ± 2°; IEC 60335-2-24:2010/AMD2:2017 Subclause 22)* and a square of 50 mm side

RB

 

 

Clause Measurement/testing Testing / measuring equipment / material needed Subcontracting
Annex U

Mechanical strength of CRTs and protection against the effects of

implosion

Test equipment acc.IEC 61965

Scale, diamond stylus, cooling liquid, timer

S
Annex V.1.2

Test method 1 – Surfaces and openings tested with

jointed test probes

Figure V.1 – Jointed test probe for equipment likely to be accessible to children Figure V.2 – Jointed test probe for equipment not likely to be accessible to children RB
Annex V.1.3

Test method 2 – Openings

tested with straight unjointed test probes

Figure V.1: straight unjointed version of the respective test probe applied with a force of 30 N. RB
Annex V.1.4

Test method 3 –

Plugs, jacks, connectors

Figure V.3 – Blunt probe RB
Annex V.1.5 Test method 4 – Slot openings Figure V.4 – Wedge probe RSH
Annex V.1.6

Test method 5 – Terminals intended to be used by an

ordinary person

Force 1 N ± 0,1N

Terminal probe IEC 61032:1997 figure 4

RB

Y.2

(Annex C)

Ultraviolet light conditioning test Ultraviolet light test apparatus – see annex C.  
Y.3 Resistance to corrosion, water borne contaminants Salt spray test apparatus according to IEC 60068-2-11 Test chamber according to ISO 3231 S
Y.3.3 Water- sulphur dioxide test Water - sulphur dioxide test chamber S
Y.4.3 Tensile strength and elongation tests Tensile strength test apparatus S
Y.4.4 Compression test

Cylindrical weight for 69 kPa Air oven

Environmental test chamber capable of testing to –33 °C 1,35 kg impact hammer apparatus

Clear spruce wood pieces

S
Y.4.5 Oil resistance Oil immersion test equipment per ISO 1817:2015 or ASTM D471- 98 S
Y.5 Protection from moisture IP X4 to X6 water test apparatus SP
Y.5.3 Water spray test Water spray test apparatus (alternative to IPX4) S
Y.5.5 Protection from excessive dust IP 5X/6X dust test apparatus SP
Y.6.2 Impact test Test chamber: minimum range of –33°C to +40°C. ROUT

 

Note: The presence of equipment alone does not indicate a satisfactory situation. Assessors must evaluate the equipment design, calibration, uncertainty and documentation to ensure compliance with the directions of the standard. The requirements of ISO/IEC 17025 regarding validation are applicable, as the tests of this standard are not standardised tests.

*Agreed during the TC 108 IEC TC 108 WG HBSTD hazard-based Meeting 2019 Raleigh

Pub Time : 2020-10-07 11:46:11 >> News list
Contact Details
KingPo Technology Development Limited

Contact Person: Ms. Lynette Wong

Tel: +86-769-81627526

Fax: 86-769-89032367

Send your inquiry directly to us (0 / 3000)

IEC 62368-1 TESTING AND MEASURING EQUIPMENT  
No. Items Description Photo Qty Brand
1 Temperature and humidity chamber IEC62368-1-cl.4.1.4 Model:KP-HWS1000L latest company news about IEC 62368 Test Equipment  0 1 KingPo
2 Test Apparatus for device forming
mains plug
IEC62368-1-cl.4.7 Model :KP-LJ220
Technical Parameter:
1. As per IEC60065-fig11
2. Weight: 1N, 2N.
3. Socket:UK, EU.
4. Arm of force 0-320mm
5.mension: 350*150*150 mm
latest company news about IEC 62368 Test Equipment  1 1 KingPo
3 Jointed test probe for equipment likely to be accessible to children IEC62368-1-cl.4.8 IEC 62368 -1-Figure V.1 latest company news about IEC 62368 Test Equipment  2 1 KingPo
4 Unjointed test probe IEC62368-1-cl.4.8 IEC62368-Annex V.1.3 Test method 2 latest company news about IEC 62368 Test Equipment  3 1 KingPo
5 Test hook IEC 62368-Figure 20 latest company news about IEC 62368 Test Equipment  4 1 KingPo
6 Flat surface IEC62368-1-cl.4.8.4.6 size:100 mm by 250 mm) latest company news about IEC 62368 Test Equipment  5 1 KingPo
7 Measuring network, touch current weighted for perception or reaction IEC 60990 figure 4 latest company news about IEC 62368 Test Equipment  6 1 KingPo
8 Measuring network, touch current weighted for let-go IEC 60990 figure 5 latest company news about IEC 62368 Test Equipment  7 1 KingPo
9 2kΩ resistor 2kΩ±2% latest company news about IEC 62368 Test Equipment  8 1 KingPo
10 Jointed test probe for equipment not likely to be accessible to children Test probes V2 latest company news about IEC 62368 Test Equipment  9 1 KingPo
11 Blunt probe Test probes V3 latest company news about IEC 62368 Test Equipment  10 1 KingPo
12 Wedge probe Test probes V4 latest company news about IEC 62368 Test Equipment  11 1 KingPo
13 Terminal probe Test probes V5 latest company news about IEC 62368 Test Equipment  12 1 KingPo
14 Winding hot resistance tester IEC62368-1-cl.5.4.1.4, Model:RC3002 Measuring range: 0.500~99.99Ω,±(-0.2% reading +5 D). 99.99~2000Ω±(-0.2% reading +2 D). 2000~10000Ω±(-0.2% reading +1 D). Power supply:AC220V, 50/60Hz , Size:380(W)×340(D)×120(H) latest company news about IEC 62368 Test Equipment  13 1 KingPo
15 Pink Noise Generator Pink Noise according to IEC62368-1- Annex E http://www.batterytestingmachine.com/sale-10623142-pink-noise-generator-it-test-equipment-iec-60065-clause-4-2-and-4-3-and-iec-62368-1-annex-e.html latest company news about IEC 62368 Test Equipment  14 1 KingPo
16 Scratch test device with steel pin Annex G 13.6.2 http://www.batterytestingmachine.com/sale-11991421-iec-60950-1-clause-2-10-8-4-automatic-abrasion-resistance-tester-printed-circuit-abrasion-strength-d.html latest company news about IEC 62368 Test Equipment  15 1 KingPo
17 Vicat test B 50 of ISO 306 IEC62368-1-cl.5.4.1.10 Dimension: 720mm×700mm×1380mm
Temperatrue: RT+10~300℃ Maximum temperature indication error :0.1℃ Temperature indication precision:
±0.5℃ Deformation measurement range:
0—1.0mm
Resolution:0.01mm Sample holder number: 3 sets
Power: 4Kw
Power supply: 220VAC 50Hz
latest company news about IEC 62368 Test Equipment  16 1 KingPo
18 Ball pressure test apparatus IEC62368-1-cl.5.4.1.10 http://www.batterytestingmachine.com/sale-11226669-iec-60695-10-2-2014-ball-pressure-tester-with-test-specimen-support-hot-deformation-capacity.html latest company news about IEC 62368 Test Equipment  17 1 KingPo
19
circuit 1 of Table D.1._Impulse test generator

IEC62368-1-cl.5.4.2.3.2.5 IEC 62368-1/Ed3-Figure D.1 Model:1950S
latest company news about IEC 62368 Test Equipment  18 1 KingPo
20 circuit 3 of Table D.1._Impulse test generator
IEC62368-1-cl.5.4.2.3.2.5 IEC 62368-1/Ed3-Figure D.2 Model:KP-PRM65
latest company news about IEC 62368 Test Equipment  19 1 KingPo
21 Tracking Index Tester IEC62368-1-cl.5.4.3 Model:KP-FT02 latest company news about IEC 62368 Test Equipment  20 1 KingPo
22 Mandrel test IEC62368-1-cl.5.4.4.6.5 IEC 62368-1- Figure 25-28 Weight:100N*1,50N*1( the pulling force of 50N, 100N, 150N can be achieved Rotate angle:230° Test mandrel:Triangle bar with a tip latest company news about IEC 62368 Test Equipment  21 1 KingPo
23 Electric Strength Test Dielectric strength tester
Made accord to IEC 62368-1-Figure 29, IEC60065, UL1310 standards
Pole diameter: 5 ± 0.1mm
Metal club weight: 100 ± 2g
latest company news about IEC 62368 Test Equipment  22 1 KingPo
24 Non-inductive Resistor 5000Ω and Ampere meter IEC62368-1-cl.5.4.11 latest company news about IEC 62368 Test Equipment  23 1 KingPo
25 Source with at least 1500A short circuit IEC62368-1-cl.5.6.4.1 (Annex R) http://www.batterytestingmachine.com/sale-12593671-250v-it-test-equipment-limited-short-circuit-test-iec-62368-1-annex-r.html latest company news about IEC 62368 Test Equipment  24 1 KingPo
26 Cheesecloth bleached cotton cloth 40g/m2 IEC62368-1-cl.6.4.8.3.3 latest company news about IEC 62368 Test Equipment  25 1 KingPo
27 Needle Flame Tester IEC62368-1-Annex S.2 Model:KP-FT03 latest company news about IEC 62368 Test Equipment  26 1 KingPo
28 Dark sticky mat, magnified glass with a resolution of 0,1 mm Conform to IEC 62368-1-cl.8.5.5.2. latest company news about IEC 62368 Test Equipment  27 1 KingPo
29 magnified glass with a resolution of 0,1 mm Conform to IEC 62368-1-cl.8.5.5.2. Magnification:20x Resolution:0.1mm   1 KingPo
30 circular plan surface φ30mm IEC62368-1-T.4 latest company news about IEC 62368 Test Equipment  28 1 KingPo
31 Flat surface IEC 62368-1-cl.8.6.2.3. flat surface 12.5cm by 20cm latest company news about IEC 62368 Test Equipment  29 1 KingPo
32 800N=330N(item 1 can be used) +100N(item 3 can be used)+150N+200N+flat surface (20N) 1 KingPo
33 Inclined plane 10° IEC 62368-1-cl.8.6.4. 1, Tilt angle :0-30 °equipped with angle measuring instrument calibration, easy to operate, high accuracy angle, precision ± 0.5 ° 2, The maximum weight load: 50kg 3, Table size: 1000*1000mm.
4.Glass Thickness:10mm
latest company news about IEC 62368 Test Equipment  30 1 KingPo
34 75mm width strap Conform to IEC 62368-1-cl.8.8 latest company news about IEC 62368 Test Equipment  31 1 KingPo
35 circular plan surface φ30mm IEC62368-1-cl.8.10.3 latest company news about IEC 62368 Test Equipment  32 1 KingPo
36 Steel disk
IEC 62368-1-cl.9.6.3 IEC CDV 62368-1/Ed3-Figure 47(including thermocouples)
latest company news about IEC 62368 Test Equipment  33 1 KingPo
37 Aluminium ring
IEC 62368-1-cl.9.6.3 IEC CDV 62368-1/Ed3-Figure 48(including thermocouples)
latest company news about IEC 62368 Test Equipment  34 1 KingPo
38 Aluminium foil
IEC 62368-1-cl.9.6.3 IEC CDV 62368-1/Ed3-Figure 49(including thermocouples)
latest company news about IEC 62368 Test Equipment  35 1 KingPo
39 Covering of ventilation
openings

IEC 62368-Annex B.3.2 piece of card with minimum 200 g/m² density
latest company news about IEC 62368 Test Equipment  36 1 KingPo
40 Wrapping Tissue 12g/ m2 – 30g/m2 latest company news about IEC 62368 Test Equipment  37 1 KingPo
41 Cord Pull test