UL Guangzhou Laboratory Orders KINGPO IPX1-8 Rain Testing System and Digitization
October 31, 2023
UL Guangzhou Laboratory Orders KINGPO IPX1-8 Rain Testing System and Digitization
roject name | Specification parameters | |||
Equipment Power Supply Specifications | Equipment power AC380V 50Hz 4kw | |||
Sample Power Supply Specification | AC220V 16A | |||
LWGYD-4 flow sensor | Flow range :0.667-4.167 L/min, pulse output | |||
LWGYD-15 flow sensor | Flow range :10.00-100.00 L/min, pulse output | |||
Big pumps | 380VAC 50Hz 2.2kw protection grade: IP55 insulation grade: F | |||
Mini Pumps | 380VAC 50Hz 0.55kw protection grade: IP55 insulation grade: F | |||
Scope of waterproof test |
IPX1,IPX2,,IPX3,IPX4,,IPX4K,IPX4K,IPX5,IPX6,IPX6K, IPX7,IPX8,JIS R1/R2,JIS S1/S2 |
|||
IPX1-IPX2 | Drop area :1000*1000 mm | |||
Drop hole diameter :0.4 mm | ||||
Drop hole spacing :20 mm | ||||
Test flow :1~1.5 mm/min (IPX1),3~3.5(IPX2) | ||||
IPX3-IPX4 | Swing radius | R400mm ,R600mm ,R800mm ,R1000mm | ||
Inner diameter of pendulum tube | Φ18mm | |||
Pinhole diameter of pendulum tube | Φ0.4mm, hole spacing 50 mm ,0.07±0.0035 L/Min per hole | |||
Swing Rainfall | According to the test standard set on the console (water supply 0.63-10 L/Min) | |||
Test time | Set on console according to test criteria (range 1-9999 seconds) | |||
Swing tube test angle | 0-3500 | |||
Swing tube test speed | About 4-60 degrees per second | |||
Speed of swing tube turntable | According to the standard, the pre-factory system has been set to 1 RPM, or 1 rpm | |||
Custom testing |
Any set within the º of :0-350 Test speed :4-60 degrees per second set; unit: degrees per second Test time :0-9999 seconds; set in seconds Test flow rate :0.63-10.0 L/min set arbitrarily in L/min unit |
|||
Sprinkle water | Number of fountains | 121,φ0.5 holes | ||
Test flow | 10±0.5 L/min | |||
Test time | Set by test standard (range 1-9999 seconds) in seconds | |||
Test pressure | 50-150 kPa | |||
IPX5-IPX6 | nozzle aperture | 6.3 mm (IPX5),12.5 mm (IPX6) | ||
Water spray | 12.5±0.625 L/min (IPX5),100±5 L/min (IPX6) | |||
Test time | Set by test standard (range 1-9999 seconds) in seconds | |||
Test pressure | Water flow regulation IPX5 about 30 kpa ,IPX6 about 100 kpa | |||
IPX7 | Test requirements |
The lowest point of the shell with 1. height less than 850 mm shall be less than 1000 mm; above the water surface The highest point of the enclosure 2. a height greater than or equal to 850 mm shall be 150 mm; below the surface of the water |
||
Test time | 30 min | |||
IPX4K | Swing radius | R200mm,R400mm,R600mm,R800mm | ||
Inner diameter of pendulum tube | Φ22mm | |||
Pinhole diameter of pendulum tube | Φ0.8mm 0.6 L/min±5 per cent per hole | |||
Angle of pendulum test | 360°(±180° actual ±175) | |||
Test speed of pendulum tube | s/Cycle 12 | |||
Swing Rainfall | 7.2-30 L/min±5% set | |||
Test time | min 10(1 position 5 min,90°5) | |||
Water pressure | 400 kPa | |||
Speed of turntable | 1RPM | |||
IPX6K | Nozzle diameter | Φ6.3mm | ||
Test flow | 75L/min±5 per cent | |||
Test time | 0-99999.9 s Set | |||
Spray pressure | 1000 kPa | |||
Turnover | Speed range | Tilt 15° RPM 1-20 | ||
Adjust height | mm 800-1700 | |||
Dimensions of Water Supply and Control System | W1310mm×D890mm×H1600mm |
-
10 Nov, 2023
-
31 Oct, 2023
-
8 Nov, 2023
-
8 Aug, 2023
-
3 Jul, 2023