According to SGS Qualified Suppliers requirements. kingpo is granted as "STATEMENT OF SGS QUALIFED SUPPLIERS"
Good day and thank you for you
According to the sample of the instrument you provided, we are very satisfied with our test. We want to change the order from 2 to 10. The following is the order details of our Asia Pacific branch. Would you please send me the quotation of the corresponding office? So we can generate an order to confirm it. Thank you.
Dear Supplier KINGPO TECHNOLOGY DEVELOPEMENT,
In the ambit of ISO 9001:2015 certification, we intend to communicate the requirements as well as its percentage used on final evaluation used by ISQ to control and monitor its external supplier’s performance as per bellow:
According with the above requirements to be maintained in future evaluations
—— ISQ Procurement Management
first of all, I would also like to thank you for the good cooperation!
We especially appreciate the fast service and that there is almost always a solution for our requests and problems.
Thank you very much for this and all the best and continue a good cooperation also for 2022!
Straight unjointed version of the respective test probe applied with a force of 30N , IEC62368-1-Figure V.1 EC62368-1-cl.4.8 IEC62368-Annex V.1.3 Test method 2 Reference Standard: IEC62368-1-Figure V.1 ... Read More
RD4L IT Test Equipment Battery Capacity Voltage Discharge Resistant Tester Battery capacity voltage discharge resistant tester RD4L 1 Introduction 1.1. Title Residual Discharge Automatic Test Software 1.0 ... Read More
Limited short-circuit test , IEC 62368-1-Annex R R.3 Test method The source shall be applied to the EUT via the mains cord supplied or specified by the equipment manufacturer. Where there is no mains cord ... Read More
Twisted Wire Test Apparatus Product Description Execution standard:GB/T4074.5-2008 &IEC60851-5:2004& refer to the United States nema & Japan jis standard Inspection standard:GB/T4279.11-2008 Satisfied gb/t6109... Read More
Vicat test -IEC62368 - clause - 22.214.171.124.2 Description: Vicat softening temperature uses single-chip control, LED digital display of temperature and deformation on the operation panel to set test parameters and ... Read More
Reel Test Apparatus Put the dabber on the chuck, then lock Put the test round-wire inserted to dabbers hole Add corresponding mass on wire , Make the wire bear the tension exactly to touch with the pole when ... Read More
IEC60065 clause 12.1.1 Bump Test Machine for Electronic Apparatus Testing with A Mass Over 7 kg I. Descriptions The KP-GT065 Bump Tester Machine is designed as per IEC60065-clause 12.1.1 ,which is used to tesr ... Read More
Impulse Tester Standard: IEC62368-1 Edition 3.0 -Annex D Description: Mode:PRM65 PRM65 is a smart impulse withstand voltage test instrument. Product meets the latest standards of IEC60065,UL6500. Suitable for ... Read More
Gasket test-IEC 62368-1-Figure Y.1 | Compression test Following the test specified in b), the same specimens shall be cooled for a period of 24 h to the minimum temperature specified by the manufacturer or -33 ... Read More
IEC61588 / 60065 Mandrel Test Device for Insulation Material Layer Abrasion Test This Mandrel Test Device according to IEC61588 Fig 6 /IEC60950 appendix and IEC60065/GB19212 standard relate clause design ... Read More