Home
Products
About Us
Factory Tour
Quality Control
Contact Us
Request A Quote
Home ProductsPlug Socket Tester

IEC60320-1 Switch Tester Coupler Lateral Pulling Test Machine

Certification
China KingPo Technology Development Limited certification
China KingPo Technology Development Limited certification
Customer Reviews
Dear Supplier KINGPO TECHNOLOGY DEVELOPEMENT, In the ambit of ISO 9001:2015 certification, we intend to communicate the requirements as well as its percentage used on final evaluation used by ISQ to control and monitor its external supplier’s performance as per bellow: According with the above requirements to be maintained in future evaluations

—— ISQ Procurement Management

Good day and thank you for you According to the sample of the instrument you provided, we are very satisfied with our test. We want to change the order from 2 to 10. The following is the order details of our Asia Pacific branch. Would you please send me the quotation of the corresponding office? So we can generate an order to confirm it. Thank you.

—— Angel

I'm Online Chat Now

IEC60320-1 Switch Tester Coupler Lateral Pulling Test Machine

IEC60320-1 Switch Tester Coupler Lateral Pulling Test Machine
IEC60320-1 Switch Tester Coupler Lateral Pulling Test Machine

Large Image :  IEC60320-1 Switch Tester Coupler Lateral Pulling Test Machine

Product Details:
Place of Origin: China
Brand Name: KingPo
Certification: Calibration Certificate
Payment & Shipping Terms:
Minimum Order Quantity: 1
Price: To be quoted
Packaging Details: safety carton pack or plywood box
Payment Terms: T/T
Detailed Product Description
Standard: IEC60320-1, Figure 19 Flexible Cable Bending Height: 40±2 Mm, Adjustable.
Pull Range: 0-100N Pull Way: Manual Operation,50 Times In One Direction And Then 50 Times In The Opposite Direction.
High Light:

power socket tester

,

hardness testing equipment

Coupler Lateral Pulling Testing Apparatus

 

 

Product Information:

 

This device is according to the IEC60320-1, figure 19 standard requirement to design. It is used for the testing of withdrawing appliance inlet under the conditions of the connector with force, for this reason to test the mechanical strength of the connector.

 

Technical Parameters:

 

1, Flexible cable bending height: 40±2 mm, adjustable.

2, Pull range: 0-100N.

3, Pull way: Manual operation,50 times in one direction and then 50 times in the opposite direction.

4, Conductor Selection and the corresponding test lateral pulls value table

 

Table 7 - Values for the lateral pulls applied

 

Rated current of connector

A

Pull

N

2.5 6
6 35
10 35
16 50

 

 

Using method:

1. Select the corresponding apparatus input socket according to the required test of the connector to install and tighten.

2. Insert the connector into the input socket of the appliance, you can adjust the adjustment block properly for other special connectors.

3. With the spring balance end to lock the connector soft cable, flat on the bakelite supporting block.

4. To pull the connector to the required test force, and the position can be adjusted.

5. Normal test, after pulling 50 times, rotate connector and appliance input socket 180°, and then pull 50 times. Do not need to release spring balance end, then corresponding rotation.

After the test, whether to enter the follow-up test according to the connector is damaged or not.

 

Note:

1. Ensure that the terminal is clamped and pay attention to safety when testing;

2. When spring scale is not in used, it should be kept loose state;

3. Apparatus should be kept dry, dust proof, pay attention to the maintenance of the equipment after the test is completed.

0-100N IEC60320-1 Switch Tester Coupler Lateral Pulling Test Machine

Contact Details
KingPo Technology Development Limited

Contact Person: Lynette

Tel: +8618826841053

Send your inquiry directly to us (0 / 3000)