Home
Products
About Us
Factory Tour
Quality Control
Contact Us
Request A Quote
Home ProductsFlame Test Equipment

IEC60695-11-5 Flammability Tester Needle Flame Tester

Certification
China KingPo Technology Development Limited certification
China KingPo Technology Development Limited certification
Customer Reviews
Dear Supplier KINGPO TECHNOLOGY DEVELOPEMENT, In the ambit of ISO 9001:2015 certification, we intend to communicate the requirements as well as its percentage used on final evaluation used by ISQ to control and monitor its external supplier’s performance as per bellow: According with the above requirements to be maintained in future evaluations

—— ISQ Procurement Management

Good day and thank you for you According to the sample of the instrument you provided, we are very satisfied with our test. We want to change the order from 2 to 10. The following is the order details of our Asia Pacific branch. Would you please send me the quotation of the corresponding office? So we can generate an order to confirm it. Thank you.

—— Angel

I'm Online Chat Now

IEC60695-11-5 Flammability Tester Needle Flame Tester

IEC60695-11-5 Flammability Tester Needle Flame Tester
IEC60695-11-5 Flammability Tester Needle Flame Tester

Large Image :  IEC60695-11-5 Flammability Tester Needle Flame Tester

Product Details:
Place of Origin: China
Brand Name: KingPo
Certification: Calibration Certificate
Model Number: KP-FT02
Payment & Shipping Terms:
Minimum Order Quantity: 1
Price: To be quoted
Packaging Details: safety carton pack or plywood box
Delivery Time: 30 working days
Payment Terms: T/T
Supply Ability: 3 sets per month
Detailed Product Description
Needle-shaped Burner: Higher Than 35mm Stainless Steel Pinhead: Φ0.9mm-Φ0.5mm
Burner Angle: 0°、45°adjustable Flame Height: 12mm ± 1mm
Ignition Gas: Butane Or Propane With More Than 95% Purity Test Temperature: 0~1000℃
High Light:

Needle Flame Test Apparatus

,

Flammability Test Chamber

IEC60695-11-5 Flammability Tester Needle Flame Tester 0

Needle Flame Tester

 

Brief Introduction

 

Needle Flame Tester is a simulation experiment project using non-flame ignition source in accordance to standard requirements of IEC60695 -11-5,GB/T5169.5-2008,GB4706.1-2005 ,etc.

Needle Flame Tester uses Needle-shaped burner in required size (Φ0.9mm ) ;transport butane gas into it ,ignite the specimen at a regular time and angle of 45° ,to check whether the specimen ignite ,lasting ignition time and combustion length to test the ignition fatalness of devices inside because of flammule caused by breakdown.

Needle Flame Tester is suitable for research,production and quality testing department of electrical devices and component parts like lighting equipment,low voltage apparatus,household appliance,machine tool electric appliance,motor-driven machine,electric tool,electronic instrument,electrical connectors and accessories;also suitable for insulating material,engineering plastic and other solid combustible material industry.

 

Characteristics:

With predetermined size (Φ 0.9 mm) needle burner, in 45°angle burning product,measure the fire risk by product light-off or hold burning time.

 

Technical parameters:

Needle burner inner hole diameter Φ 0.5mm ± 0.1mm, Diameter,9mm≤Φ, length ≥ 35mm, stainless steel
Burner angle 0,° 45° (adjust flame height)
Thermocouple Ø0.5mm Type K (Ni/Cr - Ni/Al), armored sheath can withstand temperature-40°C~ 1100°C
Burning time 0-999.9 s ± 0.1 s adjustable (usually selected for 30s)
Hold Burning time 0-999.9 s ± 0.1 s, automatic recording, manual timeout
Flame Height 12mm ± 1mm (with height measurement instruments)
Flame Gas butane gas/Butane gas, min. 95% purity (can use bottled lighter gases)
Temperature Test Range 0~1000°C
Flame Temperature Requirements from 100 °C ± 2 °C liters to 700 °C ± 3 °C time in 23.5 seconds ± 1 seconds
Standard Copper Block 4mm±0.01mm, weight.0.58g±0.01g before drilling. Cu-ETP
Test process automatic control, independent convulsions
Chamber ≥0.5m3
Size W1100mm×D700mm×H1300mm, exhaust hole Ø100mm
Control Using single chip microcomputer + touch screen control
Consult standard GB/T5169.10-2006 , IEC60695-2-10:2000,UL746A
Power Supply 800VA ,220V, 48-60Hz
Display panel language Chinese + English (adjustable

 

 

 

 

 

3

.Test procedure

Installation

* This tester should be placed on a level table

* Table size no less than 1400W * 900D * (600-800)H mm

* Distance to the wall: > 200mm

* Exhaust pipe: diameter of 100mm

* The test room should be independent room equipped with exhaust system and firefighting device

* Please prepare gas (butane or purity >95% propane) and gas regulator

1.1) installs exhaust pipe, tighten the fitting

1.2) connect wire control box as below

IEC60695-11-5 Flammability Tester Needle Flame Tester 1

1.2) connect wire control box as below

IEC60695-11-5 Flammability Tester Needle Flame Tester 2

 

1.3) connect gas

IEC60695-11-5 Flammability Tester Needle Flame Tester 3

 

 

Attention

  • This equipment should be placed on level ground or table, in an environment of temperature 25±10℃, humidity 50±30%RH.
  • Keep this equipment away from heat or corrosion source.
  • Please keep this tester at least 200mm away from wall, for heat dissipation.
  • Please check and calibrate this equipment once a year. Ensure the performance and precision.
  • Its not allowed to stabbed or scrap touch screen with a sharp object.

IEC60695-11-5 Flammability Tester Needle Flame Tester 4IEC60695-11-5 Flammability Tester Needle Flame Tester 5

 

Contact Details
KingPo Technology Development Limited

Contact Person: Lynette

Tel: +8618826841053

Send your inquiry directly to us (0 / 3000)