Many Thanks to Our Valued Customers
July 27, 2017
Recently,we have sold:
1.An IEC 60529 Hose Nozzle to CSA Group ( United Kingdom)
2.Some guages to Kierie Plastic Sdn. Bhd.
| No. | Items | Description |
| 1 | A pair of plug and ring gauges for 15 mm conical connectors. | These gauges are made according to ISO 5356-1-2015-figA |
| 2 | A pair of plug and ring gauges for 22 mm conical connectors. | These gauges are made according to ISO 5356-1-2015-figA |
| 3 | Gauge for testing semi-rigid male conical fittings | according to ISO 594-1-fig3B |
| 4 | Gauge for testing female conical fittings of all materials | according to ISO 594-1-fig3c |
3.An IEC 60529 Hose Nozzle 6.3/12.5mm to Bureau Veritas Saudi Arabia Testing Services
4.Items below to Valtavalo Ltd in Finland
| No. | Items | Description |
| 1 | Ball Pressure Tester | 1 the ball diameter: 5mm (R2.5mm) 2 the total test pressure: 20N ± 0.2N 3 samples bearing: Diameter 50mm, length 100mm Solid stainless steel cylinder 4 materials: stainless steel materials |
| 2 | Torque Tester for end caps | Range: 0~10Nm Temperature compensation range: -10℃~60℃ Requirements for environment: Working temperature: 25±5°C Relative humidity: ≤65%R.H Power: AC 230V±10V, 50Hz±1Hz Permissions for environment Working temperature: 0-40°C Relative humidity: ≤75%R.H Power: AC 230V±10%, 50Hz Store condition Temperature: -20~50°C Humidity: <75%R.H Dimension: 330mm×110mm×335mm |
| 3 | G13 Lamp cap gauge | "GO" and" NOT GO" gauge for G13 cap 7006-44-4 |
| 4 | G13 Lamp cap gauge | “GO” gauge for G13 cap 7006-45-4 |
| 5 | Test holder for torque test for G13 capped lamp | IEC61195 FigA.1 |
Ball Pressure Tester
Torque Tester
5.test probe 13 and Glow Wire Tester to UL International Ltd. (Hong Kong)
| No. | Items | Description |
| 1 | Test Probe 13 | according to IEC 61032:1997 figure 9 |
| No. | Items | Description |
| 2 | Glow Wire Tester | according to IEC 60695-2-10 glow wire:4mm+/-0.04mm Ni/Cr(80/20) thermocouple:1.0mm K type(1250℃) temperature: 500-1120℃, temperature wave：> 3℃ enter deepth: 7mm+/-0.5mm moving speed: 10-25mm/s test period: 30s+/-0.1s test volume: 0.5m³ power supply: 220VAC 1KVA dimensions : 1100 * 700 * 1300mm |
6.IEC 60529 IPx3/4 Spray nozzle to Fluidine s.r.l.
| No. | Items | Description |
| 1 | IEC 60529 IPx3/4 Spray nozzle |
Hand-held device to verify pretection against spraying and splashing water Comply to IEC 60529 Figure 5 121 holes of 0.5mm; 1 hole at the center 1 inner circles of 12 holes at 30°pitch 4 outer circles of 24 holes at 15°pitch Moving shield：Stainless steel Spray nozzle：brass and nickel plated |
7.test probe 12 to TÜV SÜD Hong Kong Ltd.
| No. | Items | Description |
| 1 | Test probe 12 | IEC 61032 Figure 8 Material:S136 HRC:52 |
8.Test Probe B to Faultrap Srl
| No. | Items | Description |
| 1 | Test Probe B |
Conforms to ：IEC61032-1997 1,. Finger Diameter:12mm |
9.to National University of Singapore (NUS) c/o Solar Energy Research Institute of Singapore
| No. | Items | Description |
| 1 | Typical arrangement for the cord anchorage pull test for component testing | Conform to IEC 61215-2-Fig11 1, Power Supply: AC220V 50HZ; 2, Weight: 12N*1,25N*2，30N*1，40N*2，50N*1( the pulling force of 30N,42N,55N,70N,80N,90N,100N,115N can be achieved); 3,Test rate:60 times/min. 4,Test times:1~9999, adjustable. 50 is by default. |
| 2 | Typical arrangement for torsion test | Conform to IEC 61215-2-Fig12 Torsion：0.10N.m, 0.15N.m, 0.35N.m, 0.60N.m, 0.80N.m, 0.90N.m, 1.0N.m, 1.20N.m, |
10.a Tumbling Barrel Tester to TUV Rheiland Germany.
| No. | Items | Description |
| 1 | Tumbling barrel test( EU) | Tumbling barrel test Tumbling barrel as described in IEC 60068.2.32，EN50075 Different to BS 1363-1 Figure 20 Timer: 0-999 times Rotation: 5 rpm Power supply: 220VAC 50/60Hz |
Yes,we are always committed to running high-quality testing equipments and professional service.KingPo appreciates all of our customers' support all the time!
-
29 May, 2023
-
13 May, 2023
-
27 Apr, 2023
-
25 Apr, 2023
-
11 Apr, 2023
-
6 Jan, 2023