Home
Products
About Us
Factory Tour
Quality Control
Contact Us
Request A Quote
Home News

Many Thanks to Our Valued Customers

Certification
China KingPo Technology Development Limited certification
China KingPo Technology Development Limited certification
Customer Reviews
Dear Supplier KINGPO TECHNOLOGY DEVELOPEMENT, In the ambit of ISO 9001:2015 certification, we intend to communicate the requirements as well as its percentage used on final evaluation used by ISQ to control and monitor its external supplier’s performance as per bellow: According with the above requirements to be maintained in future evaluations

—— ISQ Procurement Management

Good day and thank you for you According to the sample of the instrument you provided, we are very satisfied with our test. We want to change the order from 2 to 10. The following is the order details of our Asia Pacific branch. Would you please send me the quotation of the corresponding office? So we can generate an order to confirm it. Thank you.

—— Angel

I'm Online Chat Now
Company News
Many Thanks to Our Valued Customers
Latest company news about Many Thanks to Our Valued Customers

Recently,we have sold:

1.An IEC 60529 Hose Nozzle to CSA Group ( United Kingdom)

2.Some guages to Kierie Plastic Sdn. Bhd.

No. Items Description
1 A pair of plug and ring gauges for 15 mm conical connectors. These gauges are made according to ISO 5356-1-2015-figA
2 A pair of plug and ring gauges for 22 mm conical connectors. These gauges are made according to ISO 5356-1-2015-figA
3 Gauge for testing semi-rigid male conical fittings according to ISO 594-1-fig3B
4 Gauge for testing female conical fittings of all materials according to ISO 594-1-fig3c

 

3.An IEC 60529 Hose Nozzle 6.3/12.5mm to Bureau Veritas Saudi Arabia Testing Services

4.Items below to Valtavalo Ltd in Finland

No. Items Description
1 Ball Pressure Tester 1 the ball diameter: 5mm (R2.5mm)
2 the total test pressure: 20N ± 0.2N
3 samples bearing: Diameter 50mm, length
100mm Solid stainless steel cylinder
4 materials: stainless steel materials
2 Torque Tester for end caps Range: 0~10Nm Temperature compensation range: -10℃~60℃
Requirements for environment: Working temperature: 25±5°C Relative humidity: ≤65%R.H Power: AC 230V±10V, 50Hz±1Hz
Permissions for environment Working temperature: 0-40°C Relative humidity: ≤75%R.H Power: AC 230V±10%, 50Hz
Store condition Temperature: -20~50°C
Humidity: <75%R.H
Dimension: 330mm×110mm×335mm
3 G13 Lamp cap gauge "GO" and" NOT GO" gauge for G13 cap 7006-44-4
4 G13 Lamp cap gauge “GO” gauge for G13 cap 7006-45-4
5 Test holder for torque test for G13 capped lamp IEC61195 FigA.1

latest company news about Many Thanks to Our Valued Customers  0

Ball Pressure Tester

latest company news about Many Thanks to Our Valued Customers  1

Torque Tester

 

5.test probe 13 and Glow Wire Tester to UL International Ltd. (Hong Kong)

No. Items Description
1 Test Probe 13 according to IEC 61032:1997 figure 9
No. Items Description
2 Glow Wire Tester according to IEC 60695-2-10 glow wire:4mm+/-0.04mm Ni/Cr(80/20)
thermocouple:1.0mm K type(1250℃)
temperature: 500-1120℃,
temperature wave:> 3℃
enter deepth: 7mm+/-0.5mm
moving speed: 10-25mm/s
test period: 30s+/-0.1s
test volume: 0.5m³
power supply: 220VAC 1KVA
dimensions : 1100 * 700 * 1300mm

latest company news about Many Thanks to Our Valued Customers  2

 

6.IEC 60529 IPx3/4 Spray nozzle to Fluidine s.r.l.

No. Items Description
1 IEC 60529 IPx3/4
Spray nozzle
Hand-held device to verify pretection against spraying and splashing water
Comply to IEC 60529 Figure 5 121 holes of 0.5mm;
1 hole at the center
1 inner circles of 12 holes at 30°pitch
4 outer circles of 24 holes at 15°pitch
Moving shield:Stainless steel
Spray nozzle:brass and nickel plated

 

7.test probe 12 to TÜV SÜD Hong Kong Ltd.

No. Items Description
1 Test probe 12 IEC 61032 Figure 8 Material:S136 HRC:52

 

8.Test Probe B to Faultrap Srl

No. Items Description
1 Test Probe B

Conforms to :IEC61032-1997

1,. Finger Diameter:12mm
2,.Finger Length :80mm
3. Baffle Plate Diameter :50mm
4,.Baffle Plate Length : 100mm 5.Force:10-50N

 

9.to National University of Singapore (NUS) c/o Solar Energy Research Institute of Singapore

No. Items Description
1 Typical arrangement for the cord anchorage pull test for component testing Conform to IEC 61215-2-Fig11 1, Power Supply: AC220V 50HZ;
2, Weight: 12N*1,25N*2,30N*1,40N*2,50N*1( the pulling force of 30N,42N,55N,70N,80N,90N,100N,115N can be achieved);
3,Test rate:60 times/min. 4,Test times:1~9999, adjustable. 50 is by default.
2 Typical arrangement for torsion test Conform to IEC 61215-2-Fig12 Torsion:0.10N.m, 0.15N.m, 0.35N.m, 0.60N.m, 0.80N.m, 0.90N.m, 1.0N.m, 1.20N.m,

 

10.a Tumbling Barrel Tester to TUV Rheiland Germany.

No. Items Description
1 Tumbling barrel test( EU) Tumbling barrel test
Tumbling barrel as described
in IEC 60068.2.32,EN50075
Different to BS 1363-1 Figure 20 Timer: 0-999 times
Rotation: 5 rpm
Power supply: 220VAC 50/60Hz

latest company news about Many Thanks to Our Valued Customers  3

 

Yes,we are always committed to running high-quality testing equipments and professional service.KingPo appreciates all of our customers' support all the time!

Pub Time : 2017-07-27 17:11:50 >> News list
Contact Details
KingPo Technology Development Limited

Contact Person: Ms. Lynette Wong

Tel: +86-769-81627526

Fax: 86-769-89032367

Send your inquiry directly to us (0 / 3000)