Payment & Shipping Terms:
|Standard:||IEC60065 Figure 6 And UL1310 Clause 40.2||Metal Pin:||φ5 Mm，mass Of 100 G & φ6.35 Mm Mass Of 50 G|
|Matel Club Weight:||100±2g||Matal Pole Diameter:||5±0.1mm|
|Max Measure Range:||20mm||Max Strength:||<12KV|
electrical safety analyzer,
tv signal tester
IEC60065 Dielectric Strength Test Instrument for Electrical safety testing
The equipment is designed according to IEC60065 and UL1310
clause 40.2, with upper metal pin having a 5 mm diameter ,mass of 100 g and a 6.35 mm diameter, mass of 50 g, lower metal pin and frame holder.
It’s mainly used for testing thin-layer insulation material electric strength. Stand part of the test device using the whole structure, made of 304 plate material processing. To improve the insulation board and creepage dielectric properties, surface brushed polished, bottom bracket the minimum distance from the edge of >35mm, the altitude of 2000 meters designed to meet the strength test requirements of 12KV.
Also meets:IEC60238 Figure 36 – Example of electric strength test instrument for solid insulation
|Main Parameter||Technical Index|
|Metal Pole Diameter||5mm for 100g pin, 6.8mm for 50g pin|
|Metal Pin Weight||50g and 100g, each 1 piece|
|Metal Pin Diameter||5mm for 100g pin, 6.8mm for 50g pin|
Contact Person: Lynette