Payment & Shipping Terms:
|Standard:||Appendix Of Eletrical Appliance And Material Safety Law||Number Of Trials:||Adjustable|
|Standard Bending Speed:||200 Times / Min||Machine Bending Speed:||0-200 Times / Min Optional.|
|Standard Bending Radius:||2.10-200mm Adjustable||Test Mode:||Continuity Test, Mechanical Test|
High Frequency Spark Tester,
Bend Test Machine
Bend Test / SeismicTest of Appendix of Eletrical Appliance and Material Safety Law(the first Supplementary Table 24)
Number of trials: adjustable
Bending speed: 200 times / min
Bending radius: 6 times wire diameter (adjustable)
Sample length: 500mm
1. Power supply: AC220V 50HZ 300W
2. Bending radius: 10-200mm adjustable
3. Bending speed: 0-200 times / min optional.
4. Counting times: 999999 times, can be set, accuracy ± 1 time
5. Servo motor drive
6. Touch screen settings and operations
7. Test mode: continuity test, mechanical test
8. Multi-core test: single off alarm stop, full off alarm stop, count to stop, etc.
9. Alarm mode: qualified prompt alarm, unqualified alarm and retain the number of tests.
Bending test,seismic test of appendix of Eletrical Appliance and Material Safety Law(the first Supplementary Table twenty-fourth) which was changed in part to our specifications,performed in the following ways.
Mount a sample of about 1.5m taked from the finished product,bending it to the bending test apparatus of FIG.2,at bending radius r=6D.
At a rate of per minute 200 times at the device is bended a predetermined number of times.
At that time not rise to s short circuit between the lines,no crack about surface of the insulation and the exterior,and other abnormalities that there is no.
Contact Person: Ms.Lynette Wong