Product Details:
Payment & Shipping Terms:
|
Standards: | IEC 60598-2-21 Figure 2 | Test Range: | Wire Diameter D 1~12.5mm |
---|---|---|---|
Diameter Of The Bobbin: | D≈(4~5)d | Motor Winding Speed: | 1 Rev / 5 Seconds |
Minimum Operating Temperature: | -15 ° C ± 1 ° C | Test Purpose: | Measure Dynamic Bending Performance Under Low Temperature Conditions |
High Light: | High Frequency Spark Tester,Bend Test Machine |
IEC 60598-2-21 Figure 2 Low-temperature Winding Test Machine
Overview
Product description
This Cold bend test apparatus is used to measure the dynamic bending performance of wire and cable under low temperature conditions, and is suitable for outer diameter less than or equal to 12.5mm round wire and cable or round insulated wire core is the wire and cable industry to test the bending performance of the product.
Less instruments.
Technical parameters
1. Test range: Wire diameter d 1~12.5mm
2. Diameter of the bobbin: D≈(4~5)d (d is the diameter of the sample)
3. motor winding speed: 1 rev / 5 seconds
4. the minimum operating temperature: -15 ° C ± 1 ° C
5. the number of trials: one piece
6. replace the test piece method: manual
Calibration Cert:
Contact Person: Ms.Lynette Wong
Tel: +8613712225112