About Us
Factory Tour
Quality Control
Contact Us
Request A Quote
Home ProductsElectrical Safety Test Equipment

IEC60950 A.5 Hot Flaming Oil Tester

China KingPo Technology Development Limited certification
China KingPo Technology Development Limited certification
Customer Reviews
Dear Supplier KINGPO TECHNOLOGY DEVELOPEMENT, In the ambit of ISO 9001:2015 certification, we intend to communicate the requirements as well as its percentage used on final evaluation used by ISQ to control and monitor its external supplier’s performance as per bellow: According with the above requirements to be maintained in future evaluations

—— ISQ Procurement Management

Good day and thank you for you According to the sample of the instrument you provided, we are very satisfied with our test. We want to change the order from 2 to 10. The following is the order details of our Asia Pacific branch. Would you please send me the quotation of the corresponding office? So we can generate an order to confirm it. Thank you.

—— Angel

I'm Online Chat Now

IEC60950 A.5 Hot Flaming Oil Tester

IEC60950 A.5 Hot Flaming Oil Tester
IEC60950 A.5 Hot Flaming Oil Tester

Large Image :  IEC60950 A.5 Hot Flaming Oil Tester

Product Details:

Place of Origin: China
Brand Name: Kingpo
Certification: Calibration Certificate
Model Number: KP-ZRY05

Payment & Shipping Terms:

Minimum Order Quantity: 1
Price: To be quoted
Packaging Details: plywood package
Payment Terms: T/T
Detailed Product Description
Power: 0.5kVA 220V 50Hz.
High Light:

abrasion resistance test machine


tv signal tester


IEC60950 A.5 Hot Flaming Oil Tester

Product introduction:


1.It confirms to IEC60950 A.5

2.It is used to detect the protective performance of fire enclosure equipment..

3. A sample of the complete finished bottom of the fire enclosure is securely supported in a horizontal position. Bleached cheesecloth of approximately 40 g/m² is placed in one layer over a shallow, flat-bottomed pan approximately 50 mm below the sample, and is of sufficient size to cover completely the pattern of openings in the sample, but not large enough to catch any of the oil that runs over the edge of the sample or otherwise does not pass through the openings. Note:Use of a metal screen or a wired-glass partition surrounding the test area is recommended.

A small metal ladle (preferably no more than 65 mm in diameter), with a pouring lip and a long handle whose longitudinal axis remains horizontal during pouring, is partially filled with 10 ml of a distillate fuel oil which is a medium volatile distillate having a mass per unit volume between 0.845 g/ml and 0.865 g/ml, a flash point between 43.5℃ and 93.5℃ and an average calorific value of 38 MJ/l. The ladle containing the oil is heated and the oil ignited and permitted to burn for 1 min, at which time all of the hot flaming oil is poured at the rate of approximately 1 ml/s in a steady stream onto the centre of the pattern of openings, from a position approximately 100 mm above the openings. The test is repeated twice at 5 min intervals, using clean cheesecloth.


Technical parameters:

1,Flaming oil:Average hot value:38MJ/L,density: 0.845g/mL0.865g/mL, flash point: 43.5℃93.5℃

2,Volume of oil dipper:>10mL

3,Pour oil flow:1mL/s

4,Ignited bedding material:40g/m2 Standard bleached gauze

5,Ignited bedding distance:Under the sample about 50mm

6,Pouring height:100mm

7,Continued burning time of hot oil:60s(1s99s Double timing can be preset)

8,Pouring time of hot oil:10s(1s99s Double timing can be preset);

9,Test area background color: black

10,Dimensions:W600mm×L700mm×H1000mm,Vent hole:ф100mm

11,Test power:0.5kVA 220V 50Hz.

Contact Details
KingPo Technology Development Limited

Contact Person: Ms.Lynette Wong

Tel: +8613712225112

Send your inquiry directly to us (0 / 3000)