Home
Products
About Us
Factory Tour
Quality Control
Contact Us
Request A Quote
News
Home ProductsIEC62368 Test Equipment

RDL-320 Tv Signal Tester Transmission System Energy Efficiency And Display Performance Test

Certification
China KingPo Technology Development Limited certification
China KingPo Technology Development Limited certification
Customer Reviews
According to SGS Qualified Suppliers requirements. kingpo is granted as "STATEMENT OF SGS QUALIFED SUPPLIERS"

—— SGS

Good day and thank you for you According to the sample of the instrument you provided, we are very satisfied with our test. We want to change the order from 2 to 10. The following is the order details of our Asia Pacific branch. Would you please send me the quotation of the corresponding office? So we can generate an order to confirm it. Thank you.

—— Angel

Dear Supplier KINGPO TECHNOLOGY DEVELOPEMENT, In the ambit of ISO 9001:2015 certification, we intend to communicate the requirements as well as its percentage used on final evaluation used by ISQ to control and monitor its external supplier’s performance as per bellow: According with the above requirements to be maintained in future evaluations

—— ISQ Procurement Management

first of all, I would also like to thank you for the good cooperation! We especially appreciate the fast service and that there is almost always a solution for our requests and problems. Thank you very much for this and all the best and continue a good cooperation also for 2022!

—— TUV Rheinland Germany

I'm Online Chat Now

RDL-320 Tv Signal Tester Transmission System Energy Efficiency And Display Performance Test

large.img.alt
small.img.alt

Large Image :  RDL-320 Tv Signal Tester Transmission System Energy Efficiency And Display Performance Test

Product Details:
Place of Origin: China
Brand Name: KingPo
Certification: Calibration Certificate
Payment & Shipping Terms:
Minimum Order Quantity: 1
Price: To be quoted
Packaging Details: safety carton pack or plywood box
Payment Terms: T/T
Detailed Product Description
Generate Test Signal: CVBS, YPbPr, SDI, HDMI, And RF Includes Four Interface Types: CVBS, YPbPr, SDI, And HDMI
Support: Ultra-high Definition (4K) Video TV Standard: PAL-DK
TV Modulation Signal: 75 Ohms 0utput Impedance: Frequency Range: 47~862 MHz
High Light:

tv test equipment

,

tv signal tester

 

RDL-320 Tv Signal Tester Transmission System Energy Efficiency And Display Performance Test

 

RDL-320 TV Signal Transmission System

 

1 Overview

1.1 Product Introduction

The product is used for digital TV testing and provides test signals for TV test experiments. The product can generate test signals CVBS, YPbPr, SDI, HDMI, and RF antenna interfaces to meet the test requirements of the main TV interface.

 

1.2 Application areas:

1. TV energy efficiency test;

2. TV display performance test;

3. TV test of other items;

 

1.3 Features:

1.3.1 Video baseband signal:

(1) Includes four interface types: CVBS, YPbPr, SDI, and HDMI;

(2) Support PAL and NTSC standard-definition video formats;

(3) Supports 1920×1080 50i, 1920×1080 50p, 1920×1080 60i,1920×1080 60p,etc

(4) Supports the ultra-high definition (4K) video formats of 3840×2160 25p, 3840×2160 30p, 3840×2160 50p, 3840×2160 60p;

1.3.2 Analog TV modulation signal:

(1) TV standard: PAL-DK;

(2) Output impedance: 75 ohms;

(3) Frequency range: (47~862) MHz;

(4) Level range: Main output: (100 ~ 120)dBμV,

Sub output: (70~90)dBμV.

1.3.3 Digital TV Modulation Signals:

(1) TV standards: DTMB, DVB-C, DVB-T, etc.;

(2) Output impedance: 50 ohms;

(3) Frequency range: (32~2196) MHz;

(4) Level range: (-60~0)dBm;

(5) Modulation error ratio: >36dB.

 

2 Front panel instructions

RDL-320 Tv Signal Tester Transmission System Energy Efficiency And Display Performance Test 0

 

1 Analog TV Modulation Module Display

Display parameter information such as frequency and level of analog television modulation signal

2 Analog TV Modulation Module Control Buttons

It is composed of up, down, left, right, ENTER and EXIT. It is used with analog TV modulation module display screen to set the parameters such as frequency and level of analog TV modulation signal.

3 System display

Display system control software interface with touch screen function, used to set system signal selection, video format and digital TV modulation signal parameter settings.

4 Thin film button

It is composed of navigation keys (up, down, left, right, etc.), numeric keypad, and function keys to facilitate the user to operate the control software.

5 logo

Territor Instruments logo

6 USB interface

It is convenient for users to connect external devices such as mouse, keyboard, and USB flash drive.

7 Power key

Control system switch.

 

3 Rear panel instructions

RDL-320 Tv Signal Tester Transmission System Energy Efficiency And Display Performance Test 1

1Video in and Audio in interfaces

The video input and audio input interfaces of the analog television modulation module, are respectively connected to the Video in interface to the Y/CVBS interface and Audio in to the L or R interface.

2RF-ATV

Analog TV RF modulated signal output interface with right side interface with 30dB attenuation.

3Y/CVBS, Pb, Pr interface

Analog TV composite signal and color difference component signal output interface, in which the Y/CVBS interface outputs a composite signal (CVBS) when the signal format is PAL and NTSC, and outputs a luminance signal (Y) in the color difference signal under other formats.

4L, R, AES/EBU interfaces

Audio output interface, where L and R are analog audio output interfaces, and AES/EBU is a digital audio output interface.

5SDI interface and HDMI interface

Digital video signal output interface.

6RF-DTV interface

Digital TV RF modulated signal output interface.

7System Peripheral Interface

It is convenient for users to connect external devices such as monitors, mouse, keyboards, and USB flash drives.

8System power interface and switch

Connect and control system power.

 

3 Technical indicators

Interface type Project Range Indicator
CVBS Brightness level (0~700)mV ±(2%X+6mV)
Chromaticity level (0~885.1)mV ±3%
Chroma phase (0~360)° ±1°
YPbPr Brightness signal output level (Y) (0~700)mV ±(2%X+6mV)
Color difference signal output level (Pb, Pr) (-350~350)mV ±(2%X+6mV)
RF-ATV Level

(100 ~120)dBμV

(70~90)dBμV

±3dB
frequency (47~862)MHz 0.001%
Differential gain —— <3%
Differential phase —— <3°
K factor —— <3%
Luminance nonlinearity —— <3%
Luminance noise —— <-46dB
RF-DTV Level (-60~0)dBm ±2dB
frequency (32~2196)MHz 0.0001%
Modulation error ratio —— >36dB

 

TV energy efficiency test

1. Connect the "Y/CVBS" connector on the rear panel of the RDL-320 to "Vdieo in", "L" or "R" to "Audio in", and the right side of the "RF-ATV" analog TV RF connector. The interface with "-30dB" is connected to the antenna input interface of the TV under test with a BNC cable and an adapter;

2. Open the desktop shortcut "TIRT"RDL-320 Tv Signal Tester Transmission System Energy Efficiency And Display Performance Test 2, the interface is shown in figure 1, in the "signal list" choose "SD_ static. MPG", "video formats" choose PAL, then click the "play" button, the broadcast signal, according to the standard adjustment eight gray-scale of the television, and test the static power;

 

RDL-320 Tv Signal Tester Transmission System Energy Efficiency And Display Performance Test 3

                                                            Figure 1

 

3. After the static standby power test is completed, click the "Stop" button to stop playing the signal, switch the signal to "SD_dynamic.mpg", and test the dynamic power;

4. Connect the "RF-DTV" interface on the rear panel of the RDL-320 to the antenna input interface of the TV under test using the BNC cable and adapter;

5. Open the desktop shortcut "StreamXpress"RDL-320 Tv Signal Tester Transmission System Energy Efficiency And Display Performance Test 4, the interface is shown in Figure 2. Click "RF Output Control" in the "Settings" menu to enter the output level setting interface. As shown in Figure 3, set the output level to -60dBm and set the modulation parameters according to Figure 2 , the signal to be measured select D: signal TS energy efficiency HD static. ts, click, "play" button, test the static power, test signal is switched to HD dynamic. ts, and play, test Dynamic power.

 

RDL-320 Tv Signal Tester Transmission System Energy Efficiency And Display Performance Test 5

 

RDL-320 Tv Signal Tester Transmission System Energy Efficiency And Display Performance Test 6

       Figure 3

 

6. The test of the set-top box is similar to the digital part of the TV. The "RF-DTV" interface on the back panel of the RDL-320 is connected to the antenna input interface of the set-top box under test using a BNC cable and an adapter.Select the corresponding digital TV input format according to the set-top box format. If it is a DVB-C standard set-top box, set the modulation parameter in “StreamXpress” to DVB-C, 64QAM,

Set "Sym" to "6875000", as shown in Figure 4. If the set-top box is a DTMB standard set-top box, set the modulation parameters according to Figure 2.

 

RDL-320 Tv Signal Tester Transmission System Energy Efficiency And Display Performance Test 7

                                     Figure 4

 

Monitor energy efficiency test

1. Connect the VGA, DVI, and DP ports of the RDL-320 rear panel to the corresponding input of the monitor as shown in Figure 1. If the monitor is an HDMI port, use a DP-HDMI adapter to convert to a HDMI cable,the connect with monitor.

RDL-320 Tv Signal Tester Transmission System Energy Efficiency And Display Performance Test 8

                                          Figure 1

2. Right-click on the desktop and select "Screen Resolution (C)" from the drop-down menu, as shown in Figure 2;

 

RDL-320 Tv Signal Tester Transmission System Energy Efficiency And Display Performance Test 9

                               Figure 2

 

3 in the "multi-monitor (M)" menu, select "Copy desktop on 1 and 2," as shown in Figure 3

RDL-320 Tv Signal Tester Transmission System Energy Efficiency And Display Performance Test 10

                                         Figure 3

4. In the "multi-monitor (M)" menu, select "display only on the desktop 2", as shown in Figure 4, click "OK", and in the pop-up dialog box, click "keep changes", then RDL-320 host display The screen turns black and the system desktop is displayed on the monitor under test;

Then right-click on the desktop, select "Screen Resolution (C)" in the drop-down menu and select the desired resolution in the "Resolution Menu". Finally, click OK, and click "Keep Changes" in the pop-up dialog box.

 

RDL-320 Tv Signal Tester Transmission System Energy Efficiency And Display Performance Test 11

                                      Figure 4

5. Enter the "Computer Monitor Test Signal" folder in the D drive directory (if the monitor is a widescreen (16:9 or 16:10), select a 1920x1080 resolution test pattern. If it is 4:3, select 1024. ×768 resolution test chart), open the picture that needs to be played, and click "Play slide (F11)", as shown in Figure 5;

RDL-320 Tv Signal Tester Transmission System Energy Efficiency And Display Performance Test 12

 

6. Right-click on the full-screen playback picture, select "Pause" in the drop-down menu, as shown in Figure 6, start the test.

RDL-320 Tv Signal Tester Transmission System Energy Efficiency And Display Performance Test 13

                                                    Figure 6

 

 

Contact Details
KingPo Technology Development Limited

Contact Person: Ms.Lynette Wong

Tel: +8613712225112

Send your inquiry directly to us (0 / 3000)