RCDS-100V200A Technical Specification for battrry Charge and Discharge Equipment
|Place of Origin:||China|
Payment & Shipping Terms:
|Minimum Order Quantity:||1|
|Price:||To be quoted|
|Packaging Details:||safety carton pack or plywood box|
|Delivery Time:||30 working days|
|Supply Ability:||30 sets per month|
|Output Power Stability:||±(0.1%FS+0.1%RD)||Minimum Discharge Voltage:||7V|
|Resolution:||1mV||Minimum Output Current:||200mA|
|Measurement Precision:||±（0.05%FS+0.05%RD）||Measuring Range:||﹣50℃～300℃|
Technical Specification for battrry Charge and Discharge Equipment
Application Scope and Function of Equipment
1.1Scope of equipment application: Mainly used to include lithium ion batteries, lead acid batteries, nickel cadmium batteries, nickel hydrogen batteries and other batteries in the production or experiment (CircleLifeTesting) and quality control.
1.2test contents of the support: battery cycle life test, battery capacity test, battery charging characteristics test, battery discharge characteristics test, battery charge-holding capacity test, battery charge-discharge efficiency test, battery overcharge, over-discharge rate tolerance test, etc.
Equipment environmental requirements and technical parameters
Power supply: AC voltage 380V ±10%, frequency:50Hz ±10%
Environmental humidity: not greater than 95% R.H (anhydrous vapor condensation)
No strong vibrations, non-corrosive gases and inflammable and explosive gases
Device specific advantages
Energy feedback (standard sine wave feedback energy, best efficiency 90%): energy feedback type, charge and discharge two-way are energy-saving, can save a lot of electricity consumption, while saving a lot of energy energy generated by the cost of air conditioning electricity.
CCCV charging: charging process CCCV no gap transition, no any voltage current impact. It can effectively prevent the protection action and the secondary protection action of PCB caused by the peak current of the battery due to the heat concentration of the polar ear depowdering or the micro-short circuit producing the island effect or the overshoot phenomenon.
The current and voltage sampling stability is good and the precision is high: high precision, high dynamic range ADC/DAC unit, high voltage sampling accuracy and good long-term stability.
IDUser management consists of three parts: permission management, role management and user management. The administrator can set administrative permissions for each functional module of the software, and set multiple user IDs according to the permissions of the operator
DL Dynamic Load Protection Function: Effectively protects the battery in the charge and discharge, prevents the battery fire and effectively avoids the current shock caused by the loosening of the connector, and effectively protects the electronic components of the battery from being damaged by the shock current, such as MOSFET, FUSE
Voltage clamp function: During the charging process in the battery protection action or equipment abnormal, the voltage clamp position in the safe voltage to prevent battery or battery pack protection plate damage.
The test step can set the record condition in sections and implement the intelligent data management record.
Support BMS CAN communication function: real-time acquisition of BMS system total voltage, total current, single core voltage, temperature and other data, and CDS voltage and current data to do synchronous comparison, set BMS voltage and current temperature and other data to meet certain conditions, the main channel steps to stop or convert, specific reading information provided by the customer related information.
A custom set of signals is supported. The user can customize the name according to their own requirements and data records. By adding "sub-signal quantity" as the protection parameter, the protection
Parameter can be set multiple, and the result can generate a new decision condition by calculating the operator "maximum value, minimum value, difference value, mean value,-,×," function relation
File query: can be based on the test date, test channels, keywords and other information search related, and support data batch export
Appearance and Structure of Equipment
Rack size (W*D*H)
|Number of modules||4CH / Rack|
|Remark: The above picture is for reference only, subject to physical object!|