Payment & Shipping Terms:
|Place Of Origin:||Guangdong,China(mainland)||Standard:||IEC60598-1 Clause 4.4.4|
|Power:||220V 50Hz||The Axial Force:||15N (bar Weight), 30N (superimposed By A 15N Vias Weight Onto The Bar)|
|Fixtures:||V-type Fixture, Front And Back Adjustable||Holding Specimen Height Range:||0-250mm|
led testing equipment,
led lamp testing equipment
The test equipment is designed and manufactured according to IEC60598-1 clause 4.4.4 standard test item requirements, test content: axial pressure is applied to the G5 lamp holder of 15N, 30N axial pressure exerted on the G13 lamp holders, pressure holding time I minutes, then quit, deformation detection lamp holder shall not exceed the amount of light foot length of 1 / 4.
It relates to an axial force testing device for a fluorescent lamp holder. The axial force testing device is characterized by comprising a base, wherein a test seat for positioning the lamp holder is arranged in the middle of the base, one side of the test seat is provided with a range finder, the other side of the test seat is provided with a linear guide rail, a thrust seat is installed on a sliding block of the linear guide rail, a pressure sensor and a test pressure head are installed on the thrust seat, and a stepping motor is connected with the thrust seat through a screw rod and a screw rod nut.
|The axial force||15N (bar weight), 30N (superimposed by a 15N vias weight onto the bar)|
|Fixtures||V-type fixture, front and back adjustable|
|Holding specimen height range||0-250mm|
Contact Person: Lynette