According to SGS Qualified Suppliers requirements. kingpo is granted as "STATEMENT OF SGS QUALIFED SUPPLIERS"
Good day and thank you for you
According to the sample of the instrument you provided, we are very satisfied with our test. We want to change the order from 2 to 10. The following is the order details of our Asia Pacific branch. Would you please send me the quotation of the corresponding office? So we can generate an order to confirm it. Thank you.
Dear Supplier KINGPO TECHNOLOGY DEVELOPEMENT,
In the ambit of ISO 9001:2015 certification, we intend to communicate the requirements as well as its percentage used on final evaluation used by ISQ to control and monitor its external supplier’s performance as per bellow:
According with the above requirements to be maintained in future evaluations
—— ISQ Procurement Management
first of all, I would also like to thank you for the good cooperation!
We especially appreciate the fast service and that there is almost always a solution for our requests and problems.
Thank you very much for this and all the best and continue a good cooperation also for 2022!
GU10 Lamp cap gauge | Go and not go gauge for bases GU10 | 7006-121-1 PURPOSE: To check the base GU10 in the following respects: - the diameter of the individual pins - the combined displacement and diameter of ... Read More
Zhaga book 18 -Annex B Mechanical drawing of the Mechanical-stop-gauge 5.1.1 Mechanical-stop-gauge The Mechanical-stop-gauge is defined in Annex B. This gauge is used to verify whether the mechanical stop ... Read More
E27 Lamp cap gauge | Gauge For Finished Lamps Fitted With E27 Caps For Testing Contact Making | 7006-50-1 Purpose:To check lamp dimensions for contact making in I.E.C holders. LED Lamp Cap Gauge Series: ... Read More
E27 Lampholder gauges | "NOT GO" Gauge for Screw Thread Lampholder E27 | 7006-26-4 Purpose: the check the maximum minor diameter of the screw thread, dimension D1, of lampholder E27 Testing: the screw thread of ... Read More
GX53 Lamp cap gauge | Go and Not Go Gauge for Checking Keyways in Caps GX53 , 7006-142E-1 PURPOSE: PURPOSE: To check caps GX53-1 in the following respects: - correct keyway position in relation to cap pins; - ... Read More
E40 Lamp cap gauge | Plug gauge for lampholders for testing protection against accidental contact E40 | 7006-24-3 Purpose: to check the E40 lampholders in respect of protection against accidental contact. ... Read More
GX53 Lamp cap gauge | "GO" and "NOT GO" Gauge For Caps GX53 | 7006-142-1 PURPOSE: To check caps GX53-.. in the following respects: - the diameter of the individual pins (dimension A); - the combined displacemen... Read More
G13 lamp cap gauge | "Go" and "Not Go" gauge for unmounted bi-pin cap(not for use on finished lamps) G13-7006-44-4 Purpose: to check dimensions E min., E max., F min., G max. and the combined pin diameter and ... Read More
G5 lamp cap gauge | "Go" and "Not Go" gauge for unmounted bi-pin cap(not for use on finished lamps) G5-7006-46-3 Purpose: to check dimensions E min., E max., F min., G max. and the combined pin diameter and ... Read More