According to SGS Qualified Suppliers requirements. kingpo is granted as "STATEMENT OF SGS QUALIFED SUPPLIERS"
—— SGS
Good day and thank you for you
According to the sample of the instrument you provided, we are very satisfied with our test. We want to change the order from 2 to 10. The following is the order details of our Asia Pacific branch. Would you please send me the quotation of the corresponding office? So we can generate an order to confirm it. Thank you.
—— Angel
Dear Supplier KINGPO TECHNOLOGY DEVELOPEMENT,
In the ambit of ISO 9001:2015 certification, we intend to communicate the requirements as well as its percentage used on final evaluation used by ISQ to control and monitor its external supplier’s performance as per bellow:
According with the above requirements to be maintained in future evaluations
—— ISQ Procurement Management
first of all, I would also like to thank you for the good cooperation!
We especially appreciate the fast service and that there is almost always a solution for our requests and problems.
Thank you very much for this and all the best and continue a good cooperation also for 2022!
G5 lamp cap gauge | "Go" and "Not Go" gauge for unmounted bi-pin cap(not for use on finished lamps) G5-7006-46-3 Purpose: to check dimensions E min., E max., F min., G max. and the combined pin diameter and ... Read More
E14 Lamp Cap Gauge | Go Gauge For E14 Caps On Finished Lamps 7006-27F-1 Purpose: to check the maximum dimensions of the screw thread and dimension T1 minimum of E14 caps on finished lamps. Testing: when the cap ... Read More
E26d Lamp Cap Gauge | Gauge With Reference Diameter Of 10.4mm For E26d Caps On Finished Lamps E26d-7006-29d-1 PURPOSE: To check dimensions Cmax. and C1max. of caps E26d. TESTING: When the unmounted cap has been ... Read More
E27 Lamp cap gauge | Gauge For Finished Lamps Fitted With E27 Caps For Testing Contact Making | 7006-50-1 Purpose:To check lamp dimensions for contact making in I.E.C holders. LED Lamp Cap Gauge Series: ... Read More
E40 Lamp cap gauge | Gauge for testing protection against bulb-neck damage and for testing contact-making in lampholders E40-7006-23-3 Purpose: to check the maximum minor diameter of the screw thread, dimesion ... Read More
E40 Lamp cap gauge | Plug gauge for lampholders for testing protection against accidental contact E40 | 7006-24-3 Purpose: to check the E40 lampholders in respect of protection against accidental contact. ... Read More
ISO 80369-7 Fig C.3 Female reference connector for testing female luer lock connector for separation from axial load and resistance to overriding ISO 80369-7 FIGURE C.1 and C.3 FEMALE LUER REFERENCE CONNECTOR ... Read More
IEC 62368 Edition 3, CDV Steel Disc, Aluminium Ring And Aluminium Foil For Wireless Charge The following foreign object are used: 1. Steel disk: IEC CDV 62368-1/Ed3-Figure 47(including thermocouples) 2. ... Read More
IEC 62368 Edition 3 Figure 47 Figure 48 Figure 49 Foreign Metallic Objects with Insulation Board for Wireless Charge 9.6 Requirements for wireless power transmitters 9.6.1 General Wireless power transmitters ... Read More