Payment & Shipping Terms:
|Standard:||JIS C3005||Test Time:||Adjustable|
|Bend Point Clamp Rod Diameter:||Optional (R Size)||Bending Radius:||Adjustable From 10 To 200mm|
|Bending Speed:||5-60 Laps/min Optional.||Bending Angle:||0-±120° Can Be Set|
High Frequency Spark Tester,
Bend Test Machine
JIS C3005 4.27.4 Section 90° Bending Test Machine / Large cable Diameter Determination Machine
90°bending test is is carried out in the process as follows in which to test(Bending of JIS C3005 4.27.4 Section).This test is able to determin about large cable diameter of cable outer also.
Mount a sample of about 1m taked from the finished product,which is fixed one end to to 90°bending test apparatus of FIG.4.At the other end hang the weight weights shown in Table 1.When i bent a predetermined number of times at a rate of per minute about 40 times the device is not rise to a short circuit between the lines,no crack about surface of the insulation and the exterior,and other
abnormalities that there is no.
Number of trials: adjustable
Bending speed: 40 times / min
Bending angle: 90°
R size: 2.5 times cable outer diameter (replaceable)
Sample length: 1000mm
1. Power supply: AC220V 50HZ 800W
2. Bending radius: adjustable from 10 to 200mm
3. Bending speed: 5-60 laps/min optional.
4. Bending angle: 0-±120° can be set
5. Bend point clamp rod diameter is optional (R size)
6. Counting times: 9999999 times, can be set, accuracy ± 1 time
7. Servo motor drive
8. Touch screen settings and operations
9. Test mode: continuity test, mechanical test
10. Multi-core test: single off alarm stop, full break alarm stop, count to stop, etc.
11. Alarm mode: qualified prompt alarm, unqualified alarm and retain the number of tests.
Contact Person: Ms.Lynette Wong