Payment & Shipping Terms:
|A, B Clamping Head Initial Distance:||200mm||A And B, Shall Be Located At A Height Above Ground Level:||At Least 1.5m|
|Sample Length:||3±0.05m||The Cable Being Turned In The Clamp:||180°|
|Standard:||IEC60245-1 Clause 3.2||Test Purpose:||Check Mechanical Strength Of Cables|
High Frequency Spark Tester,
Bend Test Machine
Static Flexibility Tester For Checking Mechanical Strength of Completed Flexible Cables / Rubber Insulated Cables
This apparatus conforms to IEC60245-1 Rubber insulated cables-Rated voltages up to and including 450/750 V-Part 1:General requirements,IEC60245-2 clause 3.2 and Figure 2 Rubber insulated cables-Rated voltages up to and including 450/750 V-Part 2: Test methods.
It is used for checking mechanical strength of completed flexible cables. This test does not apply to flexible cables with cores of nominal cross-sectional area greater than 4mm2 and cables having more than 18 cores laid up in more than two concentric layers.
|A, B clamping head initial distance||200mm|
|A and B, shall be located at a height above ground level||At least 1.5m|
|The cable being turned in the clamp||180°|
|Number of testing times||2|
Contact Person: Ms.Lynette Wong