Payment & Shipping Terms:
|Pressure Range:||0.5～100Kpa||Temperature Range:||Normal Temperature|
Battery Testing System,
Battery Testing Equipment,
IEC62133 Clause 7.3.7 Battery Chamber
Battery Altitude Simulation Tester
Simulate high altitude low-pressure chamber for lithium battery pouch cell safety performance testin
used for battery test at high altitude and low voltage.It should be tested for 6h under negative pressure of 11.6kPa(1.68psi).Battery qualified without explo-
sion,fire,smoke and leakage.Automatic control of test period(like 6h).Monitor inside voltage change throughout.Test finish when achieving the objective.
Standard basis:GB/T 18287, UL2054, UN 38.3,UL 1642,IEC61960,IEC62133,etc
Structure and Feature:
1. External:high end A3 painted steel sheet with firmcoating and anti-rust capability.
2. Internal:good quality SUS304# stainless steel sheet with fire and corrosion proof and easy cleaning Teflon tape to protect the chamber ultimately.
3. Filling material:ultrafine aluminum silicate wool
4. Front opening double-layer toughened glass viewing window
5. Automatic control of air input and output and constant voltage.Chamber door uses high temperature resistant sillica gel bar which ensure a fine air-proof effectiveness and constant vacuum degree.
6. Safety device:Pre-overpressure device and pressure-relief value
7. Automatic alert:operational mistakes and timeout
8. Built-in vacuum pump,easy to use and move.
Internal:SUS201# stainless steel sheet,thickness:4mm;
External:A3 cold-rolled painted steel sheet;thickness:1.2mm;
Vacuum degree display:pointer type controller
Timer:LED display.Freely set between 0~9999H(H/M/S adjustable)
Note:Operational environment temperature is(20±5)℃ to keep inside temp.
1. Low voltage test host machine:1 set(built-in vacuum pump)
2. stainless shelf:2 pieces
3. operation instruction:1 booklet
4. warranty card:1 pcs
1. Avoid direct sunlight,high temperature and moisture
2. On stable surface
3. Power:three-phase four-wire system,reliable earthing.
4. Environment temperature is(20±5)℃.
PACKAGE AND SHIPPING
1 Standard exported package : Internal anticollision protection, external export wooden box package
2 Shipping by express, by air, by sea according to customer's requirements to suggest the most suitable shipping mode
3 Responsible for the damage during shipping process, change the damage part for free
4 Supply with suitable voltage input and power plug according to customer's country requirements.
1 We supply machines with battery technology support.
2 We can also supply a full set of materials for lithium battery including polymer battery, cylinder battery, mobile phone battery, EV battery.
3 We can also supply a full set of lithium battery equipment for lab research, pilot scale research and production line.
4 We can also supply a full set of battery technology for battery design, research and producing.
We cooperated with each other, and we will do TOP OF THE BEST battery
Contact Person: Lynette