|
| MOQ: | 1 |
| Price: | To be quoted |
| Standard Packaging: | safety carton pack or plywood box |
| Delivery Period: | 7 working days |
| Payment Method: | T/T |
| Supply Capacity: | 50 pcs per month |
| Clause | Measurement/Testing | Testing/Measuring Equipment Needed | Subcontracting |
|---|---|---|---|
| 4.11 | Power input | Suitable devices for voltage, current/power and frequency supply: 1 phase and 3 phase variacs | R |
| 5.3 | Ambient temperature, humidity, atmospheric pressure | Suitable devices for recording ambient temperature, humidity, atmospheric pressure | R |
| 5.7 | Humidity preconditioning treatment | Environmental conditions: Climate chamber controlling temperature and humidity | R |
| 5.9.2 | Accessible parts | Force gauge (30 N), standard test finger (figure 6), straight unjointed test finger, test hook (figure 7) | R |
| 7.1.2 | Legibility of markings | Illuminance meter | R |
| 7.1.3 | Durability of markings | Distilled water, ethanol (96% pure), isopropyl alcohol, timer/stop watch | R |
| 8.4.2 | Accessible parts including applied parts | Oscilloscope, oscilloscope leads, suitable instruments for measuring voltage, current, capacitance, test pin (Figure 8), metal test rod (D = 4 mm, L = 100 mm), force gauge (10 N) | R |
| 8.4.3, 8.4.4 | Limitations voltage and energy | Suitable oscilloscope recorder/set-up & RCL meter | R |
| 8.5.5.1 | Defibrillation protection | 5 kV test circuit & oscilloscope interface circuit according to Figures 9 & 10, oscilloscope | S |
| 8.5.5.2 | Energy reduction test | The test circuit according to Figure 11, oscilloscope, oscilloscope leads | S |
| 8.6.4 | Impedance and current-carrying capability | Current source (25 A minimum, 50 or 60 Hz, 6 V maximum) | R |
| 8.7 | Leakage currents and patient auxiliary currents | Measuring device according to Figure 12, mains isolation transformers, variacs, voltmeter, millivoltmeter, aluminium foil, diverse circuits (fig. 13-20) | R |
| 8.8.3 | Dielectric strength | High voltage tester, isolating transformer for HV-tests (fig. 28), stop watch/timer | R |
| 8.8.4.1 a) | Ball pressure test | Test equipment according to IEC 60695-10-2 | R |
| 8.8.4.2 | Resistance to environmental stress | Apparatus for ageing rubber in oxygen | S |
| 8.9 | Creepage distances and air clearances | Oscilloscope, oscilloscope leads, callipers, micrometer, spacing gauges, force gauge (2 N & 30 N), standard test finger (figure 6) | R |
| 8.9.1.7 | Material groups classification | Test equipment according to IEC 60112 | S |
| 8.9.3.4 | Thermal cycling | Heating cabinet | R |
| 8.11.3.5 | Cord anchorage | Force gauge (at least 100 N), torque gauge (at least 0.35 Nm) | R |
| 8.11.3.6 | Cord guards | Weights, angle gauge, radius gauge | R |
| 9.4 | Instability hazards | 5° & 10° inclined planes or inclinometer or trigonometric calculation, force gauge (at least 220 N), 20 cm by 20 cm test surface, weights, test threshold (10 mm high and 80 mm wide), 7 cm strap, stop watch/timer | R |
| 9.5.2 | Cathode ray tubes | The relevant tests of IEC 60065, Clause 18. | S |
| 9.6.2.1 | Audible acoustic energy | A-weighted sound pressure level according to ISO 3746, ISO 9614-1 or IEC 61672-1 | S |
| 9.6.3 | Hand-transmitted vibration | Measurements are made in accordance with ISO 5349-1. | S |
| 9.7.5 | Pressure vessels | Hydraulic pressure test apparatus | S |
| 9.8 | Hazards associated with support systems | Weights or load cell, 0.1 m2 test surface, stop watch/timer, human body test mass (Figure 33) | R |
| 10.1 | X-radiation | Radiation meter | S |
| 10.3 | Microwave radiation | Radiation meter | S |
| 10.4 | Lasers | Test equipment according to IEC 60825-1 | S |
| 11.1 | Excessive temperatures | Temperature indicator/recorder suitable for this function and thermocouples, 4 wire resistance unit, test corner, variac | R |
| 11.2 | Fire prevention | Spark ignition test apparatus (Figure 34), oxygen gas analyzer | S |
| 11.3 | Constructional requirements for fire enclosures | FV tests specified in IEC 60695-11-10 | S |
| 11.6.2 | Overflow | 15° inclined plane or inclinometer or trigonometric calculation, stop watch/timer, high voltage tester | R |
| 11.6.3 | Spillage | Flask or graduated cylinder, stop watch/timer | R |
| 11.6.5 | Ingress of water or particulate matter | Classification tests of IEC 60529 | W |
| 11.6.6 | Cleaning and disinfection | Dielectric strength and leakage current tests as appropriate | R |
| 11.6.7 | Sterilization | Sterilisation to client specification | S |
| 13 | Hazardous situations and fault conditions | Stop watch/timer, voltmeter, ammeter, temperature indicator/recorder suitable for this function and thermocouples, 4 wire resistance unit, cheesecloth | R |
| 15.3 | Mechanical strength | Force gauge (250 N minimum), circular plane surface 30 mm in diameter, 500 g steel ball, 50 mm thick hardwood board (hardwood > 600 kg/m3), 40 mm step, hardwood doorframe (40 mm2), circulating air oven | R |
| 15.4.2 | Temperature and overload control devices | Positive temperature coefficient devices (PTC's) with IEC 60730-1: 1999, clauses 15, 17, J.15 and J.17 | S |
| 15.4.3.4 | Primary Lithium batteries | Performance of the tests identified in IEC 60086-4 | S |
| 15.4.3.4 | Secondary Lithium batteries | Performance of the tests identified in IEC 62133 | S |
| 15.4.6 | Actuating parts of controls | Force gauge (at least 100 N), torque gauge (at least 6 Nm), stop watch/timer | R |
| 15.4.7 | Cord-connected hand-held and foot-operated control devices | Force gauge (minimum 1,350 N), 30 mm diameter test tool, stop watch/timer | R |
| 15.4.7.3 | Entry of liquids | Classification tests of IEC 60529 | W |
| 15.5.1.1 | Transformers | Winding tester for transformers, temperature indicator/recorder suitable for this function and thermocouples variac, loads | R |
| 15.5.2 | Dielectric strength | 5x voltage / 5x frequency dielectric strength test fixture, stop watch/timer | R |
| 16.6 | Leakage currents | As in sub-clause 8.7 | R |
| A 10.4 | Light emitting diodes (LEDs) | As specified in IEC 62471 | S |
| G | Protection against hazards of ignition of flammable anaesthetic mixtures | 4 mm & 12 mm diameter test rods, timer/stop watch, gasket test B-b of IEC 60068-2-2, force gauge (minimum 100 N), gas pressure meter (0 to 400 Pa range), voltmeter, ammeter, ohmmeter, meter for capacitance and inductance, oxygen mixture (volume percentage 12.2% ± 0.4%), test apparatus for flammable mixtures (Figure G.7) | S |
| G.4.3 | Prevention of electrostatic charges | Antistatic material testing according to ISO 2882 | S |
| L | Insulated winding wires for use without interleaved insulation | Sample preparation according to IEC 60851-5:1996 & dielectric according to 60601-1; flexibility and adherence test 8 of IEC 60851-3:1996; mandrels of diameters according to Table L.1; heat shock test 9 of IEC 60851-6:1996; 2 mm diameter shot of stainless steel, nickel or nickel plated iron | S |
|
|
| MOQ: | 1 |
| Price: | To be quoted |
| Standard Packaging: | safety carton pack or plywood box |
| Delivery Period: | 7 working days |
| Payment Method: | T/T |
| Supply Capacity: | 50 pcs per month |
| Clause | Measurement/Testing | Testing/Measuring Equipment Needed | Subcontracting |
|---|---|---|---|
| 4.11 | Power input | Suitable devices for voltage, current/power and frequency supply: 1 phase and 3 phase variacs | R |
| 5.3 | Ambient temperature, humidity, atmospheric pressure | Suitable devices for recording ambient temperature, humidity, atmospheric pressure | R |
| 5.7 | Humidity preconditioning treatment | Environmental conditions: Climate chamber controlling temperature and humidity | R |
| 5.9.2 | Accessible parts | Force gauge (30 N), standard test finger (figure 6), straight unjointed test finger, test hook (figure 7) | R |
| 7.1.2 | Legibility of markings | Illuminance meter | R |
| 7.1.3 | Durability of markings | Distilled water, ethanol (96% pure), isopropyl alcohol, timer/stop watch | R |
| 8.4.2 | Accessible parts including applied parts | Oscilloscope, oscilloscope leads, suitable instruments for measuring voltage, current, capacitance, test pin (Figure 8), metal test rod (D = 4 mm, L = 100 mm), force gauge (10 N) | R |
| 8.4.3, 8.4.4 | Limitations voltage and energy | Suitable oscilloscope recorder/set-up & RCL meter | R |
| 8.5.5.1 | Defibrillation protection | 5 kV test circuit & oscilloscope interface circuit according to Figures 9 & 10, oscilloscope | S |
| 8.5.5.2 | Energy reduction test | The test circuit according to Figure 11, oscilloscope, oscilloscope leads | S |
| 8.6.4 | Impedance and current-carrying capability | Current source (25 A minimum, 50 or 60 Hz, 6 V maximum) | R |
| 8.7 | Leakage currents and patient auxiliary currents | Measuring device according to Figure 12, mains isolation transformers, variacs, voltmeter, millivoltmeter, aluminium foil, diverse circuits (fig. 13-20) | R |
| 8.8.3 | Dielectric strength | High voltage tester, isolating transformer for HV-tests (fig. 28), stop watch/timer | R |
| 8.8.4.1 a) | Ball pressure test | Test equipment according to IEC 60695-10-2 | R |
| 8.8.4.2 | Resistance to environmental stress | Apparatus for ageing rubber in oxygen | S |
| 8.9 | Creepage distances and air clearances | Oscilloscope, oscilloscope leads, callipers, micrometer, spacing gauges, force gauge (2 N & 30 N), standard test finger (figure 6) | R |
| 8.9.1.7 | Material groups classification | Test equipment according to IEC 60112 | S |
| 8.9.3.4 | Thermal cycling | Heating cabinet | R |
| 8.11.3.5 | Cord anchorage | Force gauge (at least 100 N), torque gauge (at least 0.35 Nm) | R |
| 8.11.3.6 | Cord guards | Weights, angle gauge, radius gauge | R |
| 9.4 | Instability hazards | 5° & 10° inclined planes or inclinometer or trigonometric calculation, force gauge (at least 220 N), 20 cm by 20 cm test surface, weights, test threshold (10 mm high and 80 mm wide), 7 cm strap, stop watch/timer | R |
| 9.5.2 | Cathode ray tubes | The relevant tests of IEC 60065, Clause 18. | S |
| 9.6.2.1 | Audible acoustic energy | A-weighted sound pressure level according to ISO 3746, ISO 9614-1 or IEC 61672-1 | S |
| 9.6.3 | Hand-transmitted vibration | Measurements are made in accordance with ISO 5349-1. | S |
| 9.7.5 | Pressure vessels | Hydraulic pressure test apparatus | S |
| 9.8 | Hazards associated with support systems | Weights or load cell, 0.1 m2 test surface, stop watch/timer, human body test mass (Figure 33) | R |
| 10.1 | X-radiation | Radiation meter | S |
| 10.3 | Microwave radiation | Radiation meter | S |
| 10.4 | Lasers | Test equipment according to IEC 60825-1 | S |
| 11.1 | Excessive temperatures | Temperature indicator/recorder suitable for this function and thermocouples, 4 wire resistance unit, test corner, variac | R |
| 11.2 | Fire prevention | Spark ignition test apparatus (Figure 34), oxygen gas analyzer | S |
| 11.3 | Constructional requirements for fire enclosures | FV tests specified in IEC 60695-11-10 | S |
| 11.6.2 | Overflow | 15° inclined plane or inclinometer or trigonometric calculation, stop watch/timer, high voltage tester | R |
| 11.6.3 | Spillage | Flask or graduated cylinder, stop watch/timer | R |
| 11.6.5 | Ingress of water or particulate matter | Classification tests of IEC 60529 | W |
| 11.6.6 | Cleaning and disinfection | Dielectric strength and leakage current tests as appropriate | R |
| 11.6.7 | Sterilization | Sterilisation to client specification | S |
| 13 | Hazardous situations and fault conditions | Stop watch/timer, voltmeter, ammeter, temperature indicator/recorder suitable for this function and thermocouples, 4 wire resistance unit, cheesecloth | R |
| 15.3 | Mechanical strength | Force gauge (250 N minimum), circular plane surface 30 mm in diameter, 500 g steel ball, 50 mm thick hardwood board (hardwood > 600 kg/m3), 40 mm step, hardwood doorframe (40 mm2), circulating air oven | R |
| 15.4.2 | Temperature and overload control devices | Positive temperature coefficient devices (PTC's) with IEC 60730-1: 1999, clauses 15, 17, J.15 and J.17 | S |
| 15.4.3.4 | Primary Lithium batteries | Performance of the tests identified in IEC 60086-4 | S |
| 15.4.3.4 | Secondary Lithium batteries | Performance of the tests identified in IEC 62133 | S |
| 15.4.6 | Actuating parts of controls | Force gauge (at least 100 N), torque gauge (at least 6 Nm), stop watch/timer | R |
| 15.4.7 | Cord-connected hand-held and foot-operated control devices | Force gauge (minimum 1,350 N), 30 mm diameter test tool, stop watch/timer | R |
| 15.4.7.3 | Entry of liquids | Classification tests of IEC 60529 | W |
| 15.5.1.1 | Transformers | Winding tester for transformers, temperature indicator/recorder suitable for this function and thermocouples variac, loads | R |
| 15.5.2 | Dielectric strength | 5x voltage / 5x frequency dielectric strength test fixture, stop watch/timer | R |
| 16.6 | Leakage currents | As in sub-clause 8.7 | R |
| A 10.4 | Light emitting diodes (LEDs) | As specified in IEC 62471 | S |
| G | Protection against hazards of ignition of flammable anaesthetic mixtures | 4 mm & 12 mm diameter test rods, timer/stop watch, gasket test B-b of IEC 60068-2-2, force gauge (minimum 100 N), gas pressure meter (0 to 400 Pa range), voltmeter, ammeter, ohmmeter, meter for capacitance and inductance, oxygen mixture (volume percentage 12.2% ± 0.4%), test apparatus for flammable mixtures (Figure G.7) | S |
| G.4.3 | Prevention of electrostatic charges | Antistatic material testing according to ISO 2882 | S |
| L | Insulated winding wires for use without interleaved insulation | Sample preparation according to IEC 60851-5:1996 & dielectric according to 60601-1; flexibility and adherence test 8 of IEC 60851-3:1996; mandrels of diameters according to Table L.1; heat shock test 9 of IEC 60851-6:1996; 2 mm diameter shot of stainless steel, nickel or nickel plated iron | S |
Address
RM C, 13/F, HARVARD COMMERCIAL BUILDING, 105-111 THOMSON ROAD, WAN CHAI, HK
Tel
86-769- 81627526
